PDTA144EU,115

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PDTA144EU,115 is a single, pre-biased, bipolar junction transistor (BJT) with a maximum collector current of 240 mA. It is used in a variety of applications, such as amplifier circuits, power supplies, and switching circuits.

A BJT is a semiconductor device composed of three layers of doped material, two of which are connected by two p-n junctions. It works by allowing current to flow from the emitter to the collector when a voltage is applied to the base. This process, known as amplification or switching, occurs because the base current controls the collector current, and the collector voltage is dependent on the base voltage.

The PDTA144EU,115 is designed for use in amplifier circuits and switching circuits. Its pre-biased design allows the device to operate at higher collector currents without the need for a base current. This feature allows the device to have a wide dynamic range, allowing it to amplify signals with a wide range of intensity. The pre-biased design also helps reduce the harmonic distortion that is usually generated in BJTs.

The PDTA144EU,115 has a maximum collector current of 240 mA and a maximum power dissipation of 500 mW. It has a turn-on voltage of 0.8 V and an off-state voltage of 0.1 V. It is also designed to work at temperatures ranging from -55°C to +125°C. It is available in an SOT-23 package.

The PDTA144EU,115 is used in a variety of applications. It can be used in power supplies, audio amplifier circuits and switching circuits. In power supplies, the PDTA144EU,115 can be used as an amplifier to amplify the voltage from a DC power source. In audio amplifier circuits, it can be used to boost the audio signal from a microphone or CD player. In switching circuits, it is used to switch between two or more circuits.

The working principle of the PDTA144EU,115 is relatively simple. When a voltage is applied to the base, it causes current to flow from the emitter to the collector. This creates a voltage drop across the collector, which can be used to amplify the input signal. The amount of gain is determined by the ratio between the collector current and the base current.

In conclusion, the PDTA144EU,115 is a single, pre-biased, bipolar junction transistor (BJT) that is designed for use in a variety of applications. It is designed to have a wide dynamic range and low harmonic distortion. Its maximum collector current is 240 mA, and it is available in an SOT-23 package. It is used in power supplies, audio amplifier circuits and switching circuits.

The specific data is subject to PDF, and the above content is for reference