RN4606(TE85L,F)

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Transistor Type:	1 NPN, 1 PNP - Pre-Biased (Dual)
Current - Collector (Ic) (Max):	100mA
Voltage - Collector Emitter Breakdown (Max):	50V
Resistor - Base (R1):	4.7 kOhms
Resistor - Emitter Base (R2):	47 kOhms
DC Current Gain (hFE) (Min) @ Ic, Vce:	80 @ 10mA, 5V
Vce Saturation (Max) @ Ib, Ic:	300mV @ 250µA, 5mA
Current - Collector Cutoff (Max):	100µA (ICBO)
Frequency - Transition:	200MHz, 250MHz
Power - Max:	300mW
Mounting Type:	Surface Mount
Package / Case:	SC-74, SOT-457
Supplier Device Package:	SM6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The RN4606 (TE85L,F) is a pre-biased array of transistors that is used to increase the switching speed in designs with multiple transistors. This is achieved by dividing the circuit into separate channels with multiple transistors in each one. It is typically used in circuits that need faster switching times than what would be available from a single transistor circuit.

Application Field

The RN4606 (TE85L,F) is typically used for applications that require the combination of speed and reliability. This includes applications such as automotive control systems, industrial machining systems, motion controllers and robotic control systems. It is also commonly used in high-end consumer electronics such as audio amplifiers and digital signal processors.

Design and Working Principle

The RN4606 (TE85L,F) is an array of transistors in which the transistors are already biased to their on state. This pre-biasing of the transistors allows for the circuit to switch quickly and reliably. It is designed with a high-speed structure which helps to minimize the power dissipation of the circuit while still providing the desired switching speed.The RN4606 (TE85L,F) is made up of four transistors; two NPN transistors and two PNP transistors. These transistors are connected in parallel and the base terminals of each transistor are connected together. When power is applied to the circuit, the NPN transistors turn on first, followed by the PNP transistors. This allows the circuit to switch quickly and reliably.

Conclusion

The RN4606 (TE85L,F) is a pre-biased array of transistors that is used to increase the switching speed of circuits with multiple transistors. It is typically used in applications that require a combination of speed and reliability and is commonly used in audio amplifiers, digital signal processors and automotive control systems. It is made up of four transistors which are already biased to their on state, allowing for the circuit to switch quickly and reliably.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description