RQ6C050BCTCR Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The RQ6C050BCTCR or the Radio Frequency (RF) 10 Volt 500mw Clipped SOT-3 Transistor is a single semiconductor package device which has maximal efficiency and performance. It can be used in diversified applications, such as low-noise amplifiers, switches, and oscillators. Below is a brief description of the principle of operation and scope of applications of the RQ6C050BCTCR.

Principle of Operation

The RQ6C050BCTCR is suitable to work as an amplifier or a switch, which is managed by an electrical signal. It works on the basis of a three-terminal structure. It has a gate, drain and a source, where the gate is used to generate the signal. The input signal applied by the gate affects the connection between the source and the drain. Therefore, when this connection is made, the transistor is in an active mode, and when the connection between source and drain is broken, the transistor is in an inactive mode.

The RQ6C050BCTCR has a maximum DC operating voltage at the drain of 250 volts. The gate-to-drain break-down voltage is at 10 volts, and it has a maximum gate-source series resistance of 1 Ohm. It also has a maximum source-drain series resistance of 250 Ohm. When the gate voltage is 6 volts, it has a maximum drain current of 2mA. Maximum peak collector power is 500mW, while the maximum Pd is 370mW. It has a DC current gain of 22 to 50.

Applications

The RQ6C050BCTCR is a widely used semiconductor package device, suitable to be used in many circuit designs and applications. As a low-noise amplifier, it offers high -60dBc unconditioned gain, low noise figure at 3.2dB and gain flatness, low input and output impedances, as well as low distortion. Moreover, it also has an internally matched 50 Ohm single-ended design, allowing for optimum noise performance.

As an oscillator, the RQ6C050BCTCR can provide a variety of different frequency-hopping signals. It offers additional advantages, such as a low-complexity operation and a more secure data transmission. This oscillator is suitable for the ScanPlus2 (ScanF) neural network system and can be used in a range of application fields, for example, defense and military, telecommunications, and radar.

The RQ6C050BCTCR is also suitable to be used as a switch. It can enable or disable the electrical connection between two control terminals, and can be employed in mobile radio systems, high-speed optical transceivers, analog audio and video systems, power amplifiers, and other related applications. In certain cases, such as when amplifiers form a single-ended stage, the RQ6C050BCTCR can also be employed as a load line switch.

Conclusion

The RQ6C050BCTCR is a versatile device which can be an efficient low-noise amplifier, oscillator, or switch. It has a three-terminal structure with a gate, drain, and source. It has an extended operating temperature range, an internally matched 50ohm single-ended design, low distortion, and convenience of usage. It can be used in a variety of application fields, such as defense and military, telecommunication, radar, mobile radio systems, high-speed optical transceivers, analog audio and video systems, power amplifiers, and other applications.

The specific data is subject to PDF, and the above content is for reference