SI1020-A-GMR

Power - Output:	20dBm (Max)
Package / Case:	85-VFLGA Exposed Pad
Operating Temperature:	-40°C ~ 85°C
Current - Transmitting:	85mA
Current - Receiving:	18.5mA
Voltage - Supply:	1.8 V ~ 3.8 V
GPIO:	53
Serial Interfaces:	I²C, SPI, UART
Memory Size:	128kB Flash, 8.5kB RAM
Sensitivity:	-121dBm
Series:	--
Data Rate (Max):	256kbps
Frequency:	240MHz ~ 960MHz
Modulation:	FSK, GFSK, OOK
Protocol:	EZRadioPro
RF Family/Standard:	General ISM
Type:	TxRx + MCU
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

RF Transceiver ICs are specialized integrated circuits that combine a receiver and a transmitter on the same chip and communicate with each other. SI1020-A-GMR is a type of RF Transceiver IC that is widely used by consumers to extend the range of radio communications used in consumer electronics, wireless networks, and other applications. This article will discuss the application fields and working principles of the SI1020-A-GMR RF Transceiver IC.

Application Fields

The SI1020-A-GMR is designed for use in a variety of consumer applications. The RF Transceiver ICs are often used in consumer electronics such as remote controls, cell phones, and game controllers. The SI1020-A-GMR offers efficient energy consumption and signal clarity for these applications. The Long Range (LR) Mode, which uses a narrowed RF field, extends the range up to 10 km. This makes the SI1020-A-GMR perfect for applications that require long-range communication between devices or from remote locations.In addition to consumer electronics, the SI1020-A-GMR is also used in industrial and scientific applications. The IC can be used in wireless sensors, smart meters, and remote data acquisition. The high sensitivity of the receiver makes it capable of sensing weak signals in challenging environments such as extreme temperatures or in harsh environments. The high-speed data transfer of the SI1020-A-GMR is also suitable for use in wireless networks and point-to-point links.

Working Principle

The SI1020-A-GMR is a single-chip transceiver with a transmitter and receiver integrated on the same package. The transmitter is used to generate and modulate radio frequency (RF) signals, and the receiver is used to decode and demodulate incoming RF signals. The transmitter and receiver are connected by an antenna to form a complete radio communication link.The RF signals transmitted by the transmitter in the SI1020-A-GMR are modulated with an amplitude, frequency, and phase. The modulation enables the user to encode data which can then be transferred through radio waves to another device. On the receiving end, the receiver decodes the data that was sent.The SI1020-A-GMR is capable of operating in several modes including Direct Sequence Spread Spectrum (DSSS) or Frequency Hopping Spread Spectrum (FHSS). In DSSS, the RF signal is spread across several frequency bands using a code sequence, which makes the signal less susceptible to interference. In FHSS, the data is spread across multiple frequencies and hops periodically for improved robustness of communication.

Conclusion

The SI1020-A-GMR is a type of RF Transceiver ICs that is widely used for consumer, industrial, and scientific applications. The IC combines a transmitter and receiver on the same chip and operates at up to 10 km in Long Range (LR) Mode. The transmitter and receiver are used to modulate and decode data for transmission and reception, and the IC supports Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS) modes for better communication performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description