TJA1020T/VM,112

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TJA1020T/VM,112 application field and working principle is a key component of an important type of communications device in the interface-drivers, receivers, transceivers category. This type of device operates in the very interface between communications systems and devices, and therefore is essential to the exchange of information between them. The TJA1020 transceiver is specifically designed for use in automotive applications at up to 1Mbps data rate. In addition to enabling the automotive communications, this transceiver provides enhanced protection of the system from electromagnetic interference (EMI).

The role of the TJA1020 transceiver is to act as a bridge between system devices, often in the form of an automotive Local Interconnect Network (LIN) bus. This bus is an electrical communications network for sensors, actuators, and other control modules inside a vehicle. The TJA1020 transceiver is designed to convert low-speed LIN signals into serial messages that can be transmitted across a wide area such as vehicles, buses and automobiles.

The TJA1020T/VM,112 transceiver has 4 main pins that deliver the following features and functions:

• RXD: The first pin is the receiver data pin, which receives the signals from the LIN bus and converts them into a serial message.
• TXD: The second pin is the transmitter data pin, which sends the serial message out to other devices.
• GND: The third pin is the ground pin, which provides the ground connection for the device.
• EN: The fourth pin is the enable pin, which is used to turn the transceiver on or off.

The TJA1020T/VM,112 transceiver has the following operating parameters:

• Data Rate: It can handle a data rate up to 1 Mbps.
• Supply Voltage: It requires a supply voltage of 5V.
• Operating Temperature: It can operate over a range of 0° to +85°C.
• EMI Protection: It has enhanced EMI protection capabilities.

The TJA1020T/VM,112 transceiver has a typical working principle which begins with the transceiver being connected to the LIN bus. The transceiver then begins to receive the signals from the bus and convert them into serial messages. Once the message is converted, it is sent out through the transmitter data pin to other devices. The TJA1020T/VM,112 transceiver is also capable of receiving the serial message from another source and converting them back into LIN bus signals for other devices to receive. This entire process is powered by the device\'s internal power supply.

The TJA1020T/VM,112 transceiver is an essential component in automotive applications including infotainment systems, power train control systems, body control systems, safety systems and many others. It is a reliable, high-performance transceiver that is specifically designed to support data rates up to 1 Mbps and offers enhanced protection against EMI. This transceiver is an important part of a system\'s ability to effectively transmit information and provides a simple yet powerful means to bridge between two very different systems.

The specific data is subject to PDF, and the above content is for reference