TJA1028T/3V3/20/1J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TJA1028T/3V3/20/1J is a physical layer transceiver module specifically designed for automotive communication applications. The module is developed to support the OSI Physical layer and Data Link layer communication protocols.

The TJA1028T/3V3/20/1J module is designed to support a wide range of physical layer communication protocols, including CAN FD and LIN. The module features an integrated power distribution system, with two channel voltage regulators for independently regulated CAN and CANFD channels. In addition, the TJA1028T/3V3/20/1J module has an integrated electrostatic discharge (ESD) protection device and a high-speed digital outputs, providing minimal noise and distortion during communication.

The TJA1028T/3V3/20/1J module can support up to 20 data frames per second, with each frame containing as many as 32 bytes. The module also provides a differential input/output driver with wide common mode, maximizing signal-to-noise ratio, while minimizing noise in the transmitted data.

The module also provides a fault-tolerant design, with a safety watchdog to detect and prevent faults in the module\'s operation. The onboard ESD protection also helps to protect the connected bus and system against unwanted noise and current transients.

The TJA1028T/3V3/20/1J module is an ideal choice for applications requiring a cost-effective and reliable communication interface. The module is also suitable for applications where small size, high speed, and minimal noise and distortion is desired.

In terms of its application fields, the TJA1028T/3V3/20/1J module is most commonly used for low-speed, single-wire communication in the automotive and industrial control industries. This module is also often used for communication between electronic components such as microcontrollers and sensors, as it is designed to have a minimal effect on the system\'s noise and power consumption. This module can also be used in any application requiring the transmission of serial digital data over a single-wire.

The TJA1028T/3V3/20/1J module is based on the CAN FD and LIN protocols, both of which are open communication protocols. The CAN protocol is used for communication between two or more bus nodes, and for data transfer over a physical medium using dedicated twisted-pair cables. The LIN protocol is used for communication between two or more nodes with limited diversity, on a single-wire bus.

The CAN FD protocol is used for communication with a maximum of 32 bytes per frame, while the LIN protocol is used for communication with a maximum of 8 bytes per frame. Both protocols utilize a fault-tolerant design, with a safety watchdog to detect and prevent faults. The module\'s integrated ESD protection helps to protect the connected bus and system against unwanted noise and current transients.

The TJA1028T/3V3/20/1J module is a reliable, compact and cost-effective physical layer transceiver module designed to support a wide range of communication protocols, while providing minimal noise and distortion. Its fault-tolerance, safety watchdog and ESD protection makes it a great choice for applications requiring reliable communication on a single-wire bus.

The specific data is subject to PDF, and the above content is for reference