UHE2A150MET

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.433" (11.00mm)
Size / Dimension:	0.248" Dia (6.30mm)
Lead Spacing:	0.098" (2.50mm)
Impedance:	1.2 Ohms
Ripple Current @ High Frequency:	126mA @ 100kHz
Ripple Current @ Low Frequency:	69.3mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	UHE
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	5000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	100V
Tolerance:	±20%
Capacitance:	15µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum electrolytic capacitors are widely used in the electrical engineering and electronic industries, providing the storage of electric charge in anticipation of its use at a later stage. The UHE2A150MET is a high-quality electrolytic capacitor, designed and manufactured to meet a range of application field and working principle requirements. In this article, we will discuss the application field and working principle of the UHE2A150MET.

Application Field of the UHE2A150MET

The UHE2A150MET is an electrolytic capacitor designed for applications such as high-frequency protection, current surge protection, filtering, bypass, and peak charge/discharge energy storage. The capacitor also serves as a decoupling capacitor in power supply lines, providing increased capacitance and improved power filtering. In addition, the UHE2A150MET can be used in a variety of applications including energy management systems, power inverters, motor drives, welding machines, solar and wind power converters, vending equipment, LED lighting, and more.

Working Principle of the UHE2A150MET

The UHE2A150MET utilizes an aluminum electrolytic capacitor system, which consists of two aluminium foil electrodes separated by an electrolyte. When a voltage is applied across the electrodes, ions from the electrolyte pass through an electric field that is set up between the two electrodes and become deposited on the aluminium foil electrodes. As the ions continue to be deposited, an electric double layer is created at the surface of each electrode. This electric double layer acts like a porous diaphragm, allowing the electrolyte to pass through but not allowing the electrodes to directly touch one another.The electrolyte inside the UHE2A150MET acts as an insulator and dielectric, and this allows the capacitor to store energy. When an electric current passes through the electrolyte, the ions in the electrolyte are attracted to the negative and positive electrodes. This creates an electric field which results in an electrostatic charge stored in the capacitor. When the charge is discharged, the ions released from the electrolyte are attracted to the opposite electrode, resulting in the release of the stored energy.

Conclusion

The UHE2A150MET is a high-quality electrolytic capacitor designed and manufactured for a wide range of applications. It is an aluminum electrolytic capacitor system which utilizes an electrolyte to store energy, and it is used in energy management systems, motor drives, power inverters, welding machines, LED lighting, and more. The electric double layer created at the surface of each electrode provide insulation and allow the electrolyte to pass through, and this results in the storage of an electrostatic charge in the capacitor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description