UKW2A220MED

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are one of the most widely used components in the electronics industry. The UKW2A220MED aluminum electrolytic capacitor is one of the most popular models in the capacitors market.

The UKW2A220MED aluminum electrolytic capacitor features a unique structural design that uses an anode and cathode connected by an electrolyte. This design helps the capacitor to achieve high capacitance values and long lifetimes. The aluminum electrolytic capacitors also have low leakage current compared to other types of capacitors, making them well-suited for power applications.

The capacitance of the UKW2A220MED varies from 0.1µF to 2200µF depending on the voltage rating. The rated voltage range covers from 6.3 VDC to 450 VDC. The allowable ripple current for the capacitor is also quite high, exceeding 3 times for some of the higher capacitance models.

The UKW2A220MED is used in a variety of applications ranging from audio and power electronics, to automation control and energy storage. In audio applications, the capacitor can be used to filter out noise, while in power electronics, it can be used to filter out high-frequency noise. In automation control, the capacitor can be used to prevent motor lifetime shortening due to induced current from the power supply. Finally, in energy storage, the capacitor can be used in capacitive energy storage circuits.

Due to its excellent performance, the UKW2A220MED aluminum electrolytic capacitor is ideal for use in wide variety of applications. Its high capacitance, low leakage current and long lifetime make it an ideal choice for high-power applications. The capacitance and voltage ratings also make it suitable for use in a range of audio and control applications.

The basic working principle of an aluminum electrolytic capacitor is similar to that of other capacitors. The capacitor consists of two conductive layers separated by an insulated layer. The negative layer works as the cathode and the positive layer works as the anode. When a voltage is applied across the layers, electric charge accumulates on both sides. This charge store helps to reduce the voltage and prevent current from passing through the circuit.

The dielectric layer between the anode and cathode is made up of a porous oxide film. This oxide film has electrons which are not connected to the anode and cathode. These electrons are electrostatically held in the oxide dielectric, and thus act as a capacitor. By changing the voltage between the two layers, the charge accumulated by the capacitor can be increased or decreased.

The UKW2A220MED aluminum electrolytic capacitor is an excellent choice for a wide range of industrial and consumer applications. Its excellent performance, low leakage current and long lifetime make it ideal for use in high-power applications. The wide range of models available allows for use in a variety of situations, from audio and power electronics to automation control and energy storage.

The specific data is subject to PDF, and the above content is for reference