UKW2A330MPD1TD Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used in modern electronics due to their low cost, large capacitance, low equivalent series resistance (ESR), high energy density and long life. A typical aluminum electrolytic capacitor consists of two aluminum foils, a separator and an electrolyte solution. The UKW2A330MPD1TD is a miniature SMD aluminum electrolytic capacitor, which is suitable for low voltage applications such as switch power supply, DC/DC converter, mainboard, etc.

The UKW2A330MPD1TD capacitor is designed with a radial leadless chip design. Its small size and good electrical performance make it suitable for use in high density circuit boards. The UKW2A330MPD1TD capacitor is designed with a snap-in mounted design, so it is easy to install and replace. It features a high ripple current, high ripple capacity, long service life and a voltage range up to 100V. The UKW2A330MPD1TD capacitor has a widely temperature range from -55℃to +105℃ and a high rated voltage of 100V.

In terms of its application field, the UKW2A330MPD1TD capacitor is widely used in many electronic circuits. It is commonly used in switch power supply, DC/DC converter, and mainboard. It is also suitable for digital products, computer and peripheral products, HDDs, industrial power, consumer products, and communication products. The UKW2A330MPD1TD capacitor is also widely used in many digital circuits, medical equipment and automotive electronics.

As for the working principle of the UKW2A330MPD1TD capacitor, it is mainly due to the electrical double layer formed on the foil surface. This structure creates a capacitance with two metal electrodes (aluminum foil) separated by an electrolyte. When the capacitor is connected to a power source, the charged particles in the electrolyte cause a voltage to be developed across the electrodes, which in turn creates a capacitive effect. The capacitance is measured in Farad, and the capacitance of the UKW2A330MPD1TD capacitor is 330µF, which means that it can store a large amount of energy in a very small package.

The life of the UKW2A330MPD1TD capacitor is determined by how much power can be stored and released after its rated voltage is exceeded. It is generally accepted that the lifetime of the aluminum electrolytic capacitor will decrease as the temperature increases. This is because when it is heated, the electrolyte solution will begin to evaporate, causing the dielectric breakdown voltage to decrease, leading to an increase in electrical leakage and a decrease in capacitor lifetime. Therefore, it is important to ensure that the capacitor is operated at a temperature lower than its rated temperature for a long lifetime.

In conclusion, the UKW2A330MPD1TD capacitor is a miniature SMD aluminum electrolytic capacitor, suitable for low voltage applications such as switch power supply, DC/DC converter and mainboard. It has a wide temperature range from -55℃to +105℃, a high ripple current, a long service life and a voltage range up to 100V, making it suitable for many different applications. Working principle of the UKW2A330MPD1TD capacitor is based on the electrical double layer formed on the foil surface, and its life is determined by how much power can be stored and released after its rated voltage is exceeded.

The specific data is subject to PDF, and the above content is for reference