2SC3264

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2SC3264 is a bipolar junction transistor (BJT) classified as a single package that is mostly used as a signal amplifier in audio, radio and television applications. The device has three terminals which represent the emitter, collector and base of the transistor. It has an output impedance of 200 Ω when used in amplification and switching applications. The maximum working current handled by the device is 100mA and it is able to withstand up to 40V against its emitter-collector (Emitter-Base) voltage.

The basic working principle of the 2SC3264 is the same for all types of BJTs, with the current flow through the semiconductor material. A small amount of current enters and exits the transistor through its base, which is referred to as the controlling terminal. The amount of current allowed to flow is based on the current entering the transistor base, known as the base current or Ib. This current controls the amount of current that is allowed to flow through the other two terminals, which are the collector and the emitter. Since the current is amplified by the transistor, the collector current (Ic) will be greater than the base current (Ib). The current gain of the device is referred to as the current amplification factor (β) and is equal to the ratio of the collector current (Ic) to the base current (Ib).

The 2SC3264 is mostly used in radio and television circuits as a signal amplifier. Due to its large current gain, the device allows a small amount of current to be amplified and then used to drive other devices such as speakers or transistors. As the device has a high Ib-Ic ratio, it is very stable when used in amplification applications. The increase in current gain can also be used in voltage regulation applications, where the base current can be used to accurately adjust the output voltage of the device.

The 2SC3264 can also be used in switching applications, where it can switch on and off loads using the base current. This type of switching is often used in low-voltage AC and DC applications. In such applications, the base current is used to control the on and off state of the switch, and the collector current is used to provide power to the load. The device can also be used in pulse-width modulation (PWM) in order to control the speed of motors.

The 2SC3264 is an extremely versatile device that has a range of applications in radio, television, amplifications and switching. The device has a high current gain and an emitter-collector voltage rating of 40V, allowing it to be used in high voltage applications with no risk of breakdown. In addition, due to its excellent stability, the device is often favored in amplifier applications where its high current gain can be used to provide accuracy in voltage regulation applications.

The specific data is subject to PDF, and the above content is for reference