APTGF300DU120G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

APTGF300DU120G is a super junction power module composed of IGBTs. It is based on a two-level three-phase half-bridge topology, which provides high current density, low inductance and cost-effectiveness. It is widely used in the field of electrical engineering.

This module consists of three high-pressure IGBT transistors, a temperature-sensitive device and thermal resistance. Each of these components serves an important role in ensuring the module is able to operate as intended. The three IGBTs are connected in a three-phase half bridge configuration and are responsible for providing the power neccesary to drive the load. The two temperature-sensing devices are used to detect the temperature of the module and be able to shut down the module if it gets too hot, thus preventing damage to the module and connected components. The thermal resistance is used to dissipate heat from the module.

The module is able to support up to 300A at 1200V peak and can do so without sacrificing too much efficiency. It also provides a wide range of features such as over-current protection, under-voltage protection and over-temperature protection. It also has a built-in safety delay circuit which ensures that the module will not turn on until it is completely at its required operating temperature.

The working principle of the APTGF300DU120G is simple. When the voltage is applied to the module, the three IGBTs will fire at the same time and will stay in that condition until the voltage is removed. The firing of the IGBTs will create a voltage difference between the two halves of the bridge, which will then be used to drive the load. The two temperature-sensing devices will constantly monitor the temperature of the module, and if it becomes too hot, the over-temperature protection circuit will shut off the module.

The APTGF300DU120G is an ideal choice of module for electrical engineering applications that require high current density, low inductance and cost effectiveness. It is used in applications such as switch-mode power supplies, servo-motor drives, and uninterruptible power supplies. It is also suitable for fast switching applications, thanks to its wide range of protection features and its integrated safety delay circuit.

In conclusion, the APTGF300DU120G is a super junction power module composed of IGBTs, which is used for applications such as switch-mode power supplies, servo-motor drives, and uninterruptible power supplies. It is composed of three high-pressure IGBT transistors, temperature-sensing devices and thermal resistance, and is able to support up to 300A at 1200V peak. The module also provides over-current, under-voltage and over-temperature protection, as well as a safety delay circuit to ensure safe operation.

The specific data is subject to PDF, and the above content is for reference