BC846AW RFG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BC846AW RFG is a single bipolar junction transistors (BJTs) typically used for short-range signal amplification. It has an NPN structure, meaning that the middle layer of the silicon semiconductor is the negative. They are often used for low current signal amplifying, ranging from 10 mA to 100 mA. It has a high current gain of 100 to 200, making it perfect for low noise amplification or signal switching.

Bipolar junction transistors come in a variety of forms and shapes, with the BC846AW RFG transistor being especially well suited for this application. It is a surface mount, three-pin transistor based around a silicon crystal. The semiconductor itself consists of three layers, namely an emitter, base and collector, which are all connected in an arrow-like arrangement. This allows current to flow in two directions, making it very useful for signal amplification.

The BC846AW RFG has a maximum power rating of -55 V/-100 mA. It has an operating temperature range of -65 C to +200C, a breakdown voltage of -45 V, and a high storage temperature range of -10 C to +150C. It is capable of producing discrete signals with a high current gain of up to 200, with a low maximum power dissipation of 500 mW. This makes it perfect for applications such as short-range signal amplification, signal switching, and low noise applications.

The working principle of the BC846AW RFG is similar to that of other types of transistors. When the application demands that a current flow, the transistor is kept in its "on" state. This state allows the emitter-base region to become forward-biased, causing the transistor to become an amplifier. When the current is interrupted, or when the application demands that a current stops flowing, the transistor then turns "off". This results in a no current state, or cut-off, and the transistor remains in that state until the application demands that a current again flows.

The BC846AW RFG is relatively easy to use, as its pins are used to control current flow and amplify the signals. Its two primary pins are the base and the collector. The base is used to control the current flow, and the collector is used to receive the incoming current to be amplified. The third pin, the emitter, is used to output an amplified version of the signal. The pins are typically connected to a source of current and a ground so that current may flow.

The BC846AW RFG can be used for a variety of different applications. It is excellent for signal amplification, signal switching and low noise applications. It is typically used in low signal gain applications due to its low maximum power rating. It is also very useful in audio amplifiers, as it has a relatively low distortion rate of 0.1%.

In conclusion, the BC846AW RFG is an effective single bipolar junction transistor that is especially well suited for low signal strength amplification in a variety of applications. It has a high current gain, an operating temperature range of -65 C to +200C, and a breakdown voltage of -45 V, making it a reliable choice for signal amplification, signal switching, and low noise applications.

The specific data is subject to PDF, and the above content is for reference