BC847,215

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BC847,215 is a bipolar junction transistor (BJT) commonly used for general purpose low-power amplification and switching applications.

In its active state, a BJT is a three-terminal device. It features an emitter, a collector, and a base. The basic operation of a BJT revolves around the movement of holes and electrons as current carriers. Electrons move from the emitter to the collector, while holes move from the base to the emitter. The relative amount of current flowing between the emitter and collector can be controlled by the current flowing between the base and the emitter.

The BC847,215 is a high current gain and voltage type transistor. It features a maximum collector current of 100mA, a minimum current gain of120, and a maximum collector-emitter voltage of 45V. This makes the BC847,215 suitable for a wide range of entry-level applications, such as audio amplifiers, logic gates, and small signal switching circuits.

When looking at the transistor\'s pin configuration, the base is on the left, the collector is in the middle, and the emitter is on the right. The BC847,215 is a low-power BJT, so it can dissipate a maximum of 200mW of power during normal operation. This makes it ideal for use in low-power applications. The transistor also features a high current gain, which makes it well-suited for use in audio amplifier circuits.

When the BC847,215 is used in an amplifier circuit, the signal voltage is applied at the base terminal of the transistor, and the amplified signal is output from the collector. The amplification of the signal is determined by the current flow between the collector and the emitter. The resistor from the base terminal to the ground sets the current flow between the collector and the emitter, and consequently sets the amplification of the signal. The amplifier circuit can be adjusted for different gains, and can be used to amplify weak signals for use in applications such as audio amplifiers.

In a switching circuit, the BC847,215 can be used to control a switch or a relay. The transistor acts as a current switch, allowing current to flow between the collector and emitter when the base is triggered. When the base is not triggered, current is not able to flow between the collector and emitter, thus effectively switching off the circuit. The current flow between the collector and emitter in this circuit can be adjusted using a resistor, allowing the switching circuit to be adjusted for different currents and voltages.

The BC847,215 is a versatile bipolar junction transistor that is well suited for a range of general-purpose, low-power applications, such as audio amplifier circuits, logic gates, and small signal switching circuits. It features a low power dissipation and a high current gain, making it ideal for entry-level projects.

The specific data is subject to PDF, and the above content is for reference