BC848BMTF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BC848BMTF is a type of bipolar junction transistor, more commonly known as a BJT. It is a type of single-transistor component which is more specifically classified as a PNP transistor with a general purpose switching configuration. It is one of the commonly used types of PNP transistors.

The BC848BMTF is used in such circuits as audio amplifiers, preamplifiers, high frequency switches, switching stages, low noise amplifiers, input/output stages of multistage circuits, and regulated power supplies. It can also be used in small signal amplifying stages of radio-frequency amplifiers, among other applications.

The BC848BMTF transistor is available with two different maximum current capacity ratings, 100mA and 150mA. The BC848BMTF is designed to operate in a maximum collector-emitter voltage of 225V and a maximum collector-base voltage of 250V. This allows for it to be capable of dissipating up to 2W of power at a maximum for use within different medium powered applications.

The BC848BMTF component works by allowing current or voltage to flow from its base to its collector when it is switched on, or from its collector to its base when it is switched off. When a small current is applied to the base of the component, it triggers the device on and causes current to flow from the collector to the emitter. This is known as active switching, and allows the component to be used in applications such as amplifying audio signals and radio frequencies.

The BC848BMTF also offers very low gain and low noise operation, which is ideal for applications that require precise control over the current or voltage being switched. Its low gain is also beneficial for applications where maximum control between the base and the collector is necessary. Its low noise operation is beneficial for reducing interference in active circuits.

As with any component, the BC848BMTF should be handled with caution to prevent any accidental shorting or overstressing of the component. Too much current or voltage flowing through the component can cause it to get damaged or destroyed. It is also important to follow the manufacturer\'s instructions for proper use in order to achieve the best performance from the component.

The specific data is subject to PDF, and the above content is for reference