BCX56,115

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BCX56,115 Application Field and Working Principle

BCX56,115 is a single-bipolar junction transistor (BJT) that is commonly used in small-signal applications. It has a maximum rating of 800mW and is capable of controlling voltages up to 25V DC with a 50mA current. The BCX56,115 is typically used with power sources up to 25V and can be found in a multitude of electronics devices, including adapters, chargers, and amplifiers.

A bipolar junction transistor is a semiconductor-based three-terminal device composed of either one N-type material sandwiched between two P-type materials (allowing for NPN transistors), or vice versa (allowing for PNP transistors). As such, there are three main terminals in a bipolar junction transistor, which are the Emitter (E), Base (B), and Collector (C).

The BCX56,115 is an NPN transistor, meaning it is composed of an N-type material sandwiched between two P-type materials. In order for the transistor to function correctly, negative voltages must be applied to the Base and the Collector, while the Emitter must be set to ground or at zero volts. When this is done correctly, the current flowing through the transistor can be manipulated in various ways.

The most common use for a bipolar junction transistor is as a switch. In this application, the Base is left open, the Collector is set to a negative voltage and the Emitter is left at zero volts. When current is supplied to the Base, it passes from the Emitter to the Collector, effectively switching the transistor on, and current can then travel from the Collector to the Emitter, completing the circuit. Once the current is removed from the Base, the transistor switches off, and current cannot pass from the Collector to the Emitter, effectively breaking the circuit.

In summary, the BCX56,115 is a single-bipolar junction transistor (BJT) designed for use in small-signal applications. It is composed of an N-type material sandwiched between two P-type materials and has a maximum rating of 800mW. It is typically used at voltages up to 25V and can be employed as a switch or an amplifier.

The specific data is subject to PDF, and the above content is for reference