BD435STU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

As part of the family of transistors, Bipolar Junction Transistors (BJT) are used in a variety of applications, and the BD435STU is an example of a single BJT device. This transistor is known as an NPN device, meaning it has two base-emitter junctions that are reverse biased, with the third base-collector junction being forward biased. The BD435STU is often used for general-purpose switching and amplification. It requires a minimum of 10 volts and can tolerate up to 30 volts of reverse bias.

The BD435STU possesses datasheet characteristics such as a collector-emitter voltage of 50 volts, a collector-base voltage of 60 volts, and a maximum collector current of 16 amperes. Its collector-emitter saturation voltage falls between 0.1 and 0.3 volts. In terms of switching and amplification purposes, the BD435STU is most useful when used within a frequency range of 10-500kHz. Finally, the device is considered a low-noise transistor, with a maximum noise output of 60dB.

The operating principle of the BD435STU is quite simple. When it’s forward biased, current flows through the base-emitter junction and is amplified by the collector-base junction. As the current is amplified, the device can be used to switch other electrical components. When reverse-biased, no current flows through the device, so it effectively acts as an open circuit, which can be used to isolate other components from the circuit.

The BD435STU is best used in applications that require a moderate-voltage, low-noise transistor. It can be used for switching, amplification, and level-shifting. As an NPN device, it is often used in logic circuits, amplifiers, and power switching applications. Furthermore, the device is great for use in environments with a moderate amount of noise due to its low noise output.

To sum up, the BD435STU is a Single Bipolar Junction Transistor designed for general-purpose switching and amplification. This device requires a minimum of 10 volts and offers a collector-emitter voltage of 50 volts, a collector-base voltage of 60 volts, and a maximum collector current of 16 amperes. Furthermore, the device is considered a low-noise device, with a maximum noise output of 60dB and a collector-emitter saturation voltage falling between 0.1 and 0.3 volts. When forward-biased, the BD435STU is great for switching, amplification, and level-shifting in applications with a moderate amount of noise.

The specific data is subject to PDF, and the above content is for reference