BTA06-800TWRG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs

A TRIAC is a three-terminal semiconductor device commonly used as a switching element in electronic systems and as a power supply control element in AC circuits. The TRIAC acronym stands for Triode for Alternating Current, which reflects its design and the fact that the TRIAC can be used to control both positive and negative cycles of an AC voltage waveform. TRIACs are commonly used in applications such as light dimmers, speed controls for AC motors, inductive heating, and wireless telecommunications. This article focuses on the BTA06-800TWRG series of TRIACs and their application fields, as well as their working principle.

The BTA06-800TWRG series of TRIACs is designed for high current and low input trigger current applications. It has 5-800A blocking current (I_GT) and 5-20mA holding current (I_H) capabilities. The majority of BTA06-800TWRG TRIACs have a maximum trigger gate current of 8mA. The BTA06-800TWRG series is available in both through-hole and SMD versions, allowing for a wide range of applications and designs. In addition, these TRIACs feature 5-50V gate tariffs and both standard and low gate power dissipation ratings.

The BTA06-800TWRG series of TRIACs are mainly used in power and energy control applications. The main uses of these TRIACs are in AC motor drives, light dimmers, and home appliances. These TRIACs can be used to precisely control the speed of AC motors, and are also used to create the dimming effect in light dimmer controls. The BTA06-800TWRG series TRIACs can also be used in the control of home appliances, such as TV sets, refrigerators, and air conditioners.

The working principle of TRIACs is based on the three layer structure of the semiconductor material they are made of. As current flows through the device, a voltage is generated across the semiconductor layers and this voltage causes the TRIAC to switch. The switching action of the TRIAC is triggered by a low current gate signal and the TRIAC is turned on when a sufficient gate voltage is applied. The AC electrical current passes through the device until it is interrupted by a voltage applied to the gate. The TRIAC can then be turned off by reducing or removing the gate voltage. The TRIAC can also be held in the off state by applying a low current to the gate, known as the holding current.

In summary, the BTA06-800TWRG series of TRIACs is designed for applications requiring high current and low input trigger current. It is mainly used in power and energy control applications, such as AC motor drives, light dimmers, and home appliances. The TRIAC works by utilizing the three layer structure of the semiconductor material and is triggered by a low current gate signal. The TRIAC can then be turned on to pass an AC current and turned off by applying a voltage to the gate or by applying a low current to the gate known as the holding current.

The specific data is subject to PDF, and the above content is for reference