BTA08-800CW3LFG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs are commonly used in industrial and commercial applications in a variety of configurations and devices. They are basically a three terminal switch, where the current flow can be controlled by the application of external control signals. The BTA08-800CW3LFG is a specific thyristor-triac and is used in a range of applications, including power switching, time delays, temperature and speed control.

The BTA08-800CW3LFG is designed for two forms of operation; as a continuous AC switch or as a phase control device. In continuous AC mode, the device act as a switch and can be used to control large amounts of power continuously. In phase control mode, a small electrode, the gate electrode, is used to control the instant of firing, resulting in a duty cycle that can be varied over a wide range. The BTA08-800CW3LFG is unidirectional; it only controls the current in a single direction and is therefore not suitable for use as a bidirectional AC switch.

The BTA08-800CW3LFG is configured with a snubber circuit to reduce the peak voltage across it and therefore to extend its life and reduce the possibility of damage. The device is also designed to allow it to withstand a reverse voltage, including peak and repetitive voltage, without any failure, hence increasing its reliability and lifetime.

The working principle of the BTA08-800CW3LFG is based on the conduction of an electric current. When a voltage is applied to the device, it switches on and conducts electricity, allowing current to flow from one terminal to another. The current flow can be controlled by a gate voltage applied across the gate terminals. When the voltage is removed, the device ceases to conduct and the current flow stops. The device can also be switched off by applying a negative gate voltage.

The BTA08-800CW3LFG can be used in a variety of applications, including DC to AC power converters, power switching applications, time delays, temperature controllers and speed controllers. In addition, it can be effectively used as a switch in a variety of circuits, including AC/DC rectifiers and power factor correction circuits.

The BTA08-800CW3LFG is a reliable, efficient triac and its use in a variety of applications ensures that it is one of the most commonly used thyristors. Its ability to control current in a single direction and to withstand a reverse voltage make it ideal for use in many industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference