BUV298V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BUV298V is a single bipolar transistor (BJT). It is primarily used in electrical and electronic circuits as a switch or amplifier. It consists of three layers, each made up of semiconductor material ( N-type silicon, P-type silicon and N-type silicon ). The device operates in the general bipolar mode of operations with the Base and Emitter junctions forward-biased and the Collector junction reverse-biased. When a voltage is applied to the Base, current will flow into the Base and Eminator junctions, activating the transistor and allowing current to flow across the Collector junction.

The BUV298V has a maximum collector current rating of 2.0 amps, which is suitable for most applications. It also has a maximum collector-to-emitter voltage rating of 60 Volts. The gain of the device is dependent on collector current and voltage, but is typically around 50. The maximum power dissipation rating is 1 watt and the reverse current rating is 200μA.

The BUV298V can be used in a number of different applications. It is used as a switch in digital circuits, for controlling the flow of current between two points in an electronic circuit. It can also be used as an amplifier, as it can increase the amplitude of a signal. In addition, it can be used as a voltage regulator, as it can maintain a constant voltage output despite changes in load. Last, it can be used in switching power supply converters.

The BUV298V is most commonly used in linear circuits, where the input and output are proportional to each other. This means that the output will increase in response to an increase in the input voltage. Since the gain of the device is dependent on collector current, changes in the collector current can affect the device’s performance. For example, increasing the collector current will typically increase the device’s gain and saturation current.

BUV298V transistors are incredibly affordable and easy to use. They are versatile devices, as they can be used for a variety of applications. When using the device, it is important to ensure that the operating parameters, such as collector current, voltage, and frequency, are all within the device’s specifications. Failure to do so could result in damage to the device or the circuit.

The specific data is subject to PDF, and the above content is for reference