CMUDM7004 TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Single-type Field Effect Transistors (FETs) are widely used in a variety of electronic applications. The CMUDM7004 TR is a particular type of FET which is designed and manufactured in a dual mode structure, allowing the device to operate with both positive and negative bias voltages.

The CMUDM7004 TR is a low-power (0.1A) voltage-controlled FET. It is a primary switching FET with high performance and low power dissipation, which allows the device to be used in a variety of switch-mode power supply (SMPS) applications.

The CMUDM7004 TR is a N-Channel FET which acts as a single device. It has a very low gate-source voltage input, with a maximum rated value of 5V. This voltage input is designed to enable fast on/off switching of the transistor. In addition, it also has a low junction temperature rating with a maximum junction temperature of 150°C.

The CMUDM7004 TR has a maximum drain current of 0.1A and a maximum source-drain voltage of 15V. It has a very low input capacitance of 0.2pF, which allows the device to operate at a higher frequency than traditional FETs. It also has a high-frequency stability with a maximum frequency of 1000MHz.

The working principle of the CMUDM7004 TR is simple. When a positive or negative bias voltage is applied to the gate (G) pin, the internal gate-source capacitance allows a small current to flow between the source and drain. This current flow induces a voltage drop between the source and drain that controls the output of the FET. With an increase in the gate voltage, the voltage drop between the source and drain increases, thereby increasing the output current. On the other hand, a decrease in the gate voltage causes the output current to decrease.

The CMUDM7004 TR is ideal for use in a variety of switch-mode power supply (SMPS) applications. It is capable of operating at high frequencies and offers high-frequency stability. The low power dissipation and low input capacitance make it an ideal choice for switching and power control applications. Additionally, it can be used as a secondary amplifier for analog signal control applications.

The CMUDM7004 TR is a versatile device for use in both positive and negative bias operations. Its low gate-source voltage input, low power dissipation, high frequency stability, and low junction temperature makes it an ideal choice for SMPS and other switching applications.

The specific data is subject to PDF, and the above content is for reference