DG212BDQ-T1-E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DG212BDQ-T1-E3 is a type of analog switch and multiplexer/demultiplexer integrated circuit, providing a high-speed connection of one signal to the other and allowing control over the selection of the channels for the signal source and destination in the system. It can be used in applications that require multiplexing of signals from different sources, such as video, audio, imaging, digital-to-analog conversion and other analog signal processing. The device allows for switching and multiplexing of signals between existing devices with a single chip, providing a more robust solution for system applications that require multiplexing. The device has been designed to minimize delay time and power consumption, as well as to provide a high performance output.

The device consists of two half-bridge single-pole double-throw switches and four independent analog multiplexers/demultiplexers. The two half-bridge switches control the selection of the input and output signals, while the multiplexers/demultiplexers provide separately controlled on and off switching between common-mode and differential signalling states. The device has two operational modes, parallel and serial, depending on the configuration of the internal switches. This allows the user to select the desired operating mode, depending on the needs of the application.

The DG212BDQ-T1-E3 operates at voltage levels from +10V to +30V and consumes very little power when in its idle state. The device features a low on-resistance of 1.5kOhm and a maximum off-state current leakage of 50nA for 10V on the gate. The device can easily switch up to 2.5V peak-to-peak signals, making it suitable for use in high-performance applications.

The two half-bridge switches are designed to provide a reduced on-resistance, allowing for a higher speed data transfer. The on-resistance of the half-bridge switches is typically 1.2Ohm. It has a wide operating temperature range from -40 to +125℃, allowing for its use in a variety of applications.

The DG212BDQ-T1-E3 also offers other advantages such as a low-power consumption mode, with typical current consumption of 0.75mA, and a fast switching speed with a typical delay time of 4ns. The device also features latch protection, which helps to reduce the power consumption in applications featuring long-term stability requirements. The device is also equipped with four enable inputs, allowing it to be used in combination with other devices such as clocks, multiplexers, and other analog switches and mux/demux devices.

The DG212BDQ-T1-E3 is capable of operating in a wide range of applications, including wireless and digital communication systems, automotive applications, and consumer electronics. The device can be used to switch between multiple input and output signals, or switch and multiplex signals within the same system. In addition, the device can be used to increase the speed and reduce power consumption of signal processing systems.

The DG212BDQ-T1-E3 is a highly integrated device, combining high switching speeds, low on-resistance, low power consumption and low leakage in a single package, making it ideal for analog signal processing applications. The device is an excellent choice for applications requiring multiplexing of signals from different sources and from different destinations.

The specific data is subject to PDF, and the above content is for reference