ES1BLHRTG

Series:	Automotive, AEC-Q101
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	100V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	950mV @ 1A
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	35ns
Current - Reverse Leakage @ Vr:	5µA @ 100V
Capacitance @ Vr, F:	10pF @ 4V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	DO-219AB
Supplier Device Package:	Sub SMA
Operating Temperature - Junction:	-55°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

ES1BLHRTG is a low cost single channel rectifier with low forward voltage drop and high blocking voltage capability. It is widely used in power supply and bridging circuits, and also for voltage surge suppression. This article discusses the application field and working principle of the ES1BLHRTG diode.

Application Field

The ES1BLHRTG diode is designed for use in power supplies, bridge rectifier circuits and voltage surge suppression applications.In power supplies, the ES1BLHRTG rectifier can be used to convert an alternating current (AC) input voltage into a direct current (DC) output. The diode conducts current in only one direction and prevents current from flowing in the opposite direction. This rectifier is ideal for low voltage and low power applications.In bridge rectifier circuits, the ES1BLHRTG can be used to convert an AC input voltage into a DC output. Bridge rectifier circuits use four diodes arranged in a bridge configuration to achieve full wave rectification. Current flows through the circuit in alternate directions in each half cycle, allowing for higher output voltage and current. Thevoltage-drop of the ES1BLHRTG make it suitable for use in lower voltage applications.The ES1BLHRTG’s high blocking voltage capability makes it ideal for use in voltage surge suppression circuits. Voltage spike can be caused by line transients and electro-magnetic interference (EMI), and can damage connected circuits if not suppressed. A protection circuit typically composed of a Zener diode, metal oxide varistor (MOV), and the ES1BLHRTG rectifier can be used to absorb the energy of voltage spikes and dissipate it as heat. This protects the connected circuits from damage.

Working Principle

Diode is an electronic component that allows current to flow through it in one direction and prevent current from flowing in the opposite direction. The ES1BLHRTG is a single-channel rectifier, meaning it has two terminals, the anode and cathode. Current flows through the diode when the anode is more positive than the cathode.The main characteristics of the ES1BLHRTG are its low forward voltage drop and high blocking voltage capability. When forward biased, the diode has a very low threshold voltage before the current begins to flow. This allows for the conversion of AC voltage into DC voltage with minimal power loss. The high blocking voltage capability can limit the voltage spike to protect the connected circuit from damage.

Conclusion

The ES1BLHRTG rectifier is a low cost and compact single channel rectifier with low forward voltage drop and high blocking voltage capability. It is ideal for use in power supplies, bridge rectifier circuits and voltage surge suppression applications. The ES1BLHRTG rectifier is designed to allow current to flow in one direction and block current in the opposite direction. It is also designed to have a low forward voltage drop, allowing for efficient conversion of AC voltage into DC voltage and also to have high blocking voltage capacity to protect circuits from transient and EMI events.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description