LIS2L02ALTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Accelerometers are widely used to measure acceleration, including quasi-static acceleration caused by the tilt of a product. The LIS2L02ALTR (LIS2L02 for short) is a low-power, low-noise, three-axis linear accelerometer used in various applications. It is designed to measure the static and dynamic acceleration of a device. The LIS2L02 operates from a wide supply voltage range of 2.4 V to 3.6 V, is suitable for a variety of industrial applications.

The industry applications of LIS2L02 include motion detection, adaptive user interface measurements, shock detection, data logging, and game control. It is an excellent choice for a wide variety of motion sensing applications, including portable devices, gaming controllers, and other applications requiring motion detection. It is also suitable for a variety of automotive application systems, such as airbag deployment, car-trip measurements, and adaptive headlights.

The LIS2L02 is a low-power 3-axis accelerometer designed to measure from -2g to +2g with 14 bits of resolution. It operates from a low voltage supply voltage of 2.4V to 3.6V and consumes an average current of only 5μA at 1.8V. It contains a MEMS sensing element and an IC interface that communicates through an SPI or I2C digital interface. The sensitivity of the sensing element can be adjusted through the internal MGAIN register. The noise level is just 20μg/√Hz at 50Hz and the power consumption is lower than 0.5μW/Hz.

The working principle of LIS2L02 lies in the MEMS (Microelectromechanical Systems) sensing element. It consists of a low-noise micromachined capacitive sensing element and a signal conditioning ASIC which is constructed into a single chip. The sensing element of the LIS2L02 is two mechanically-coupled beams, sensing acceleration due to changes in the capacitance between the beams. A parasitic capacitance is formed between the beams. The applied acceleration causes a displacement of the beams, which results in a variation of the parasitic capacitance. This variable capacitance is then processed by the ASIC of the device for further analysis.

The ASIC of the LIS2L02 contains four main blocks: an analog block, an output stage, an ADC, and a digital block. The analog block consists of an amplifier, filter, and signal conditioning circuits. It amplifies the signal from the sensing element and provides a filtered output. The output stage provides the analog output signal which can be used by the external system as a voltage or current. The ADC is a 12-bit SAR ADC which converts the amplified output signal into a digital signal. The digital block consists of a controller, digital filters, analog-to-digital compensation, FIFO, and digital interfaces.

The controller manages all timing and control functions inside the device, such as configuring registers, selecting modes, setting sample rates, etc. The digital filter is a programmable filter which can be used to reduce the effect of aliasing on the noise measurement. The analog-to-digital compensation circuit is used for non-linearity compensation. The FIFO is used to store the data samples. Finally, the digital interface is used to communicate with the external system.

In summary, the LIS2L02ALTR is a low power, low noise, three-axis linear accelerometer designed to measure static and dynamic acceleration of a device with high accuracy. It is suitable for a variety of motion sensing applications, including portable devices, gaming controllers, and automotive systems. It is implemented in a single chip and operates from a wide supply voltage range of 2.4 V to 3.6 V. It utilizes MEMS sensing element and integrates a controller, digital filter, ADC, and digital interface to communicate with the external system features.

The specific data is subject to PDF, and the above content is for reference