MAX312CSE+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX312CSE+ is an integrated analog switch and multiplexer/demultiplexer configured as a dual 4-channel multiplexer (MUX) for low- and medium-power signal switching applications. This device provides four channels and each channel can be independently powered from a fixed analog supply voltage or a variable voltage source, such as a Li-Ion battery. The device is designed to switch analog signals up to full rail-to-rail input and output range. It can operate in normal, inverted, or mixed (normal and inverted) modes, and each channel can be independently enabled or disabled. The MAX312CSE+ also features a variable power supply and ultra-low power consumption.

The MAX312CSE+ is ideal for switching low voltage differential signals, such as those originating from a sensor or a data converter. It is also suitable for applications such as switching analog audio signals and low resolution digital signals. The MAX312CSE+ is available in a 5-pin SOT23 package and is rated for operation over the -40°C to +125°C temperature range.

This device offers the convenience of switching low voltage differential signals quickly between one of two analog sources. It has two analog input pins, A0 and A1, to receive signals from a converter or other source. These channels are also used to select between two analog outputs, B0 and B1, with greater than 40 dB isolation between adjacent channels. It also offers a power-on reset circuit to ensure the device starts in a known state and maintains it during power cycling.

The MAX312CSE+ also has a low-power, single-supply logic stage which controls the switch matrix, allowing the user to configure the switch functions, select which input is to be connected to the output, and enable or disable the switch channels The logic stage works with a 3.0 V/5.5 V power supply and provides voltage level translation between control and switched I/O levels. This feature allows the device to be used with lower supply voltages, reducing power consumption and simplifying bias circuitry.

The MAX312CSE+ can be controlled using a digital interface such as SPI, UART, I2C, or GPIO. The multiplexer/demultiplexer can also be driven using 3-wire logic and general purpose inputs. The switching speed of up to 1 MHz allows it to be used for a wide range of signal switching tasks, from switching audio to low resolution digital signals.

The MAX312CSE+ provides a fast and versatile signal switching solution for low- and medium-power applications. It integrates multiplexer/demultiplexer and analog switches, allowing it to be used in various signal switching applications. Its low power consumption makes it suitable for battery-operated applications. Combining its low power consumption, high speed and the flexibility of the digital control interface, the MAX312CSE+ is an ideal choice for a wide range of low- and medium-power signal switching applications.

The specific data is subject to PDF, and the above content is for reference