MAX328CWE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX 328CWE is a low power, CMOS analog switch, multiplexer/demultiplexer. It belongs to the family of device from MAXIM Integrated Products which contains a wide range of switch products including multiplexers, demultiplexers and single pole/double pole switches. It offers very low on-resistance and low cross-talk, ideal for signal manipulation in attenuators, wire harness, board level and computer interface applications.

The switch portion of the device consists of a fixed, non-inverting, high speed CMOS switch. This switch has a signal input and an output, as well as an enable signal. The signal is passed through the switch when the enable signal is asserted. When the enable signal is deasserted, the output will remain in the high impedance state, allowing the signal source to be changed without affecting the output. The device has an on-resistance (Ron) of 2.5 Ohms and a cross-talk of -70 dB at 10 kHz.

The multiplexer/demultiplexer portion of the device provides a means of exchanging a single signal between several sources. It consists of a single input signal, two enable signals and multiple outputs. The enable signal controls when the inputs are connected to the selected output. When one of the enable signals is asserted, the output is enabled and the input is routed to the selected output. When both enable signals are deasserted, the output is disabled and put in a high impedance state, allowing the input source to be changed without affecting the output.

The MAX 328CWE provides a very low power and low-cost method of controlling signals in data acquisition and control applications. It is also ideal for applications such as screen switching, control multiplexers or control/monitor multiplexers. Its design allows for the use of different types of control signals, making it well suited for applications such as radio receiver/transmitter, audio and video switching, power and ground switching and general purpose switching.

The MAX 328CWE can be used in a variety of applications that require analog switching, multiplexing/demultiplexing. It is well suited for use in attenuator applications, wire harness, board level and computer interface applications. It is also extremely useful for radio receiver/transmitter and audio/video switching applications.

In summary, the MAX 328CWE is a highly integrated switch, multiplexer/demultiplexer that provides low on-resistance (2.5 Ohms) and low cross-talk (-70dB at 10 kHz) ideal for signal manipulation in various types of applications. It is widely used in data acquisition, control, radio communication and audio/video switching applications.

The specific data is subject to PDF, and the above content is for reference