MAX351CPE+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX351CPE+ is the latest low-voltage, low-power CMOS analog multiplexer/demultiplexer. It is designed for interfacing with Solid State Memory, LCD booster, high-speed A/D and D/A, and other low-voltage high-speed analog applications. It features low-voltage operation from 2.7V to 5.5V, low power consumption, and high input impedance to minimize crosstalk.

The MAX351CPE+ is an analog switch with a single low-power CMOS control transistor. This control transistor is capable of switching a signal with a high input impedance of about 6MΩ and minimal capacitance across the switch. It also has a guaranteed low on-resistance of 2.5Ω maximal, regardless of the logic level. It uses low-voltage, low-power logic inputs which make it suitable for applications requiring very low voltages, such as those often associated with memory applications.

When power is applied to the MAX351CPE+, the control transistor is enabled and conducts the signal through in a positive direction, or inverted and outputs it in a negative direction. This enables the device to have a minimal effect on the input signals. The transistor is also designed to allow low-voltage, low-power logic inputs to be used. By using logic levels with smaller supply voltages, the device reduces power consumption.

The MAX351CPE+ can be used for a variety of switching and multiplexing applications. When used as an analog multiplexer, it can be used to select one of many signals. It can also be used for multiplexing data, audio, and video, with either single or dual channels, depending on the configuration. For multiplexing audio, the device can be used to switch between two or more inputs and output a single signal.

The MAX351CPE+ can also be used as an analog demultiplexer, which allows a single signal to be split into multiple separate channels. This is useful in applications such as transmitter/receiver arrays, where multiple separate signals need to be sent or received. For example, the MAX351CPE+ can be used to demultiplex a stereo signal, so that the left and right channels can be sent to separate devices.

The MAX351CPE+ can also be used as an analog switch to control the connection between two circuits. This is useful when two signals are considered too large to fit onto a single substrate, or when one signal needs to be connected or disconnected from a voltage source in order to set a desired voltage level. It is also useful in applications where one signal needs to be delayed for a certain amount of time, or when an application requires several signals to be multiplexed and demultiplexed in rapid succession.

In summary, the MAX351CPE+ is an ideal solution for an interface between low-voltage, high-speed analog circuits. It features low power consumption and high input impedance, while offering a wide variety of switching and multiplexing capabilities. By utilizing logic levels and smaller supply voltages, it reduces power consumption while maintaining optimal performance. The MAX351CPE+ is perfect for a variety of analog switching, multiplexing and demultiplexing applications.

The specific data is subject to PDF, and the above content is for reference