NSS40200UW6T1G

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Transistor Type:	PNP
Current - Collector (Ic) (Max):	2A
Voltage - Collector Emitter Breakdown (Max):	40V
Vce Saturation (Max) @ Ib, Ic:	300mV @ 20mA, 2A
Current - Collector Cutoff (Max):	100nA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce:	150 @ 1A, 2V
Power - Max:	875mW
Frequency - Transition:	140MHz
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	6-WDFN Exposed Pad
Supplier Device Package:	6-WDFN (2x2)
Base Part Number:	NSS40200

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

NSS40200UW6T1G is a type of single Bipolar Junction Transistor (BJT). It is mainly used in various analog and digital circuits. This type of device is used for a wide range of applications, ranging from communications and consumer electronics to audio and automotive circuits.The NSS40200UW6T1G is a single BJT transistor which is used for both digital and analog applications. The device is a three-terminal device and has three leads which are labeled as Base (B), Collector (C) and Emitter (E). The Base lead is used to control the current flow between the Collector and Emitter and is connected to an external circuit. The Collector lead is the output terminal and is connected to an external circuit as well. The output current will flow through the Collector lead when a voltage is applied to the Base. The Emitter lead is where the current is drawn from and then flows out of the device.The working principle of a Bipolar Junction Transistor (BJT) is based on the notion of a control element and two conductive elements. When a voltage is applied to the Base lead of the NSS40200UW6T1G transistor, the control element controls the level of current which flows between the Collector and Emitter leads. The two conductive elements, which are the Collector and Emitter, act as either a switch or an amplifier depending on the type of signal being applied.When the NSS40200UW6T1G is used as a switch, it is necessary to control the current flow between the collector and the emitter with the voltage applied to the base. As the voltage increases, the current flow between the collector and emitter will increase until it reaches the maximum level. This maximum level can be adjusted by the user, depending on the required application. When a BJT is used as an amplifier, the current flow is increased or decreased relative to the base voltage but it is still the same current flow. The output voltage of the amplifier can then be modified by the user in order for it to be fit for the desired application.The NSS40200UW6T1G can be used in a wide range of applications such as audio amplifiers and radio receivers. The transistor can also be used in several automotive applications such as electric motors and alternators. The device is also suitable for use in power supplies, linear voltage regulators, and power switching applications.In conclusion, the NSS40200UW6T1G is a single Bipolar Junction Transistor (BJT) which is used for both analog and digital circuits. The device is a three-terminal device which has three leads: Base, Collector and Emitter. The working principle of this BJT is based on the notion of a control element and two conductive elements. Due to its versatility, the device can be used in a wide range of applications such as audio amplifiers, radio receivers, automotive applications, power supplies, linear voltage regulators, and power switching applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description