NTHS1206N01N4702JE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

NTHS1206N01N4702JE is a Temperature Sensors - NTC Thermistors. NTC thermistors are resistors with a negative temperature coefficient, meaning the resistance decreases as the temperature increases. It is used for temperature measurement, control and regulation. NTHS1206N01N4702JE has small form factor, tight tolerance, and it is widely used in many areas.

When exposed to increasing temperature, thermistors will decrease resistance with rising temperature. NTHS1206N01N4702JE has an operating temperature range of -45°C to 205°C. This allows it to sense temperature changes with great accuracy. It also has fast response time with minimal hysteresis. Its resistance is capable of reaching as low as 10 ohms. NTHS1206N01N4702JE can be used for temperature regulation in automotive, medical and industrial applications.

When using NTHS1206N01N4702JE in an electric circuit, the resistance of the thermistor follows Ohm\'s Law. To use a thermistor as a temperature sensor, the thermistor is wired into a voltage divider and voltage divider is connected to an electronic circuit. The resistive value of the thermistor will drop as the temperature increases, reducing the voltage output of the voltage divider. This change in voltage can then be used to calculate the current temperature of the environment.

NTHS1206N01N4702JE can also be used in over/under voltage protection. It is wired into a voltage divider above and below a desired voltage range. As the voltage rises above the set point, the resistance of the thermistor will decrease and send a voltage signal to the electronic circuit, which can then be programmed to do something such as turn off the power when the voltage rises too high. Similarly, when the voltage falls below the set point, the resistance of the thermistor will also increase and this will send a voltage signal to the electronic circuit, which can then be used to turn on the power.

NTHS1206N01N4702JE is also used as a temperature controller. In this case, the thermistor is wired into a voltage divider along with a temperature switch and other components. When the environment temperature exceeds a certain point, the resistance of the thermistor will decrease and the temperature switch will be triggered. This in turn will send a signal to the electronic circuit, which can then be programmed to do certain actions such as turn on or off a cooling system.

NTHS1206N01N4702JE is a reliable and accurate NTC thermistor that can be used in a wide variety of temperature sensing, control, and regulation applications. With its small form factor, tight tolerance, and fast response time, it can be used in automotive, medical and industrial applications. It is a great choice for temperature regulation applications, over/under voltage protection, and even as a temperature controller.

The specific data is subject to PDF, and the above content is for reference