PUMH10Z

Series:	Automotive, AEC-Q101
Part Status:	Active
Transistor Type:	2 NPN - Pre-Biased (Dual)
Current - Collector (Ic) (Max):	100mA
Voltage - Collector Emitter Breakdown (Max):	50V
Resistor - Base (R1):	2.2 kOhms
Resistor - Emitter Base (R2):	47 kOhms
DC Current Gain (hFE) (Min) @ Ic, Vce:	100 @ 10mA, 5V
Vce Saturation (Max) @ Ib, Ic:	100mV @ 250µA, 5mA
Current - Collector Cutoff (Max):	100nA
Frequency - Transition:	230MHz
Power - Max:	300mW
Mounting Type:	Surface Mount
Package / Case:	6-TSSOP, SC-88, SOT-363
Supplier Device Package:	SOT-363

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>The PUMH10Z is a pre-biased array of bipolar transistors (BJT) that is used in many different applications. In general, the PUMH10Z is a small-signal driver and amplifier designed to work with low-voltage signals, typically up to 5.0 volts in peak-to-peak.</p><p>The PUMH10Z is made up of eight NPN transistors in a single package. Each transistor can handle currents up to 500 mA and has an SOT-23 package, making it suitable for a wide range of applications.</p><p>The PUMH10Z offers many advantages over other types of transistors and amplifiers, including higher gain, low distortion, high output impedance, and excellent thermal stability. As a result, it is well-suited for applications such as audio amplifiers, voltage multipliers, and instrumentation.</p><p>The working principle of the PUMH10Z is based on the concept of current sharing. This means that the PUMH10Z is designed so that the current flowing through each of the transistors is shared. This sharing of current is critical for proper functioning as it ensures that all the transistors are operating at the same voltage.</p><p>In addition to its many advantages, the PUMH10Z also offers significant cost savings compared to other transistors and amplifiers. This makes it an attractive choice for many applications where a low-cost solution is needed.</p><p>In conclusion, the PUMH10Z is a pre-biased array of bipolar transistors (BJT) that offers many advantages over other transistors and amplifiers. It is well-suited for use in applications such as audio amplifiers, voltage multipliers, and instrumentation, thanks to its high gain, low distortion, high output impedance, and excellent thermal stability. In addition, it is relatively inexpensive compared to other solutions, making it an attractive choice for many applications.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description