STGB10NC60KDT4

Series:	PowerMESH™
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
IGBT Type:	--
Voltage - Collector Emitter Breakdown (Max):	600V
Current - Collector (Ic) (Max):	20A
Current - Collector Pulsed (Icm):	30A
Vce(on) (Max) @ Vge, Ic:	2.5V @ 15V, 5A
Power - Max:	65W
Switching Energy:	55µJ (on), 85µJ (off)
Input Type:	Standard
Gate Charge:	19nC
Td (on/off) @ 25°C:	17ns/72ns
Test Condition:	390V, 5A, 10 Ohm, 15V
Reverse Recovery Time (trr):	22ns
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Supplier Device Package:	D2PAK
Base Part Number:	STG*10NC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The STGB10NC60KDT4 is part of a range of transistors known as insulated gate bipolar transistors (IGBTs), specifically a single IGBT. This component is designed to enable design engineers to develop robust, low cost designs primarily for inverter switching applications. This article will look at the application field of the STGB10NC60KDT4 and its working principle.

Application Field

The STGB10NC60KDT4 component’s application field mainly revolves around inverter switching. It is mainly used for applications that need robustness for such applications as air conditioners, air pumps and elevators. The component also has a wide operating temperature range of 0°C to 125°C, making it suitable for a variety of applications including automotive and marine. The component has a repetitive peak off-state voltage of 600V and it is available in a variety of package sizes, making it suitable for a range of sizes and applications.

Working Principle

The STGB10NC60KDT4 is a single insulated gate bipolar transistor (IGBT). IGBTs are semiconductors which combine the low saturation voltage of a bipolartransistor with the high input impedance of a field-effect transistor. This makes IGBTs optimal for use as switches in a variety of applications as they pose less of a burden on the power supply of the circuit than other switches such as a relay.An IGBT functions by regulating the current applied to the gate of the transistor. This means that when the gate voltage is low (i.e. the voltage is below a certain threshold) the transistor will be off and the voltage applied to the drain and source terminals of the IGBT will be zero. However, once the gate voltage is increased to a level above the threshold, the transistor will be on, allowing a current to flow from source to drain. This current is regulated by the applied gate voltage, allowing for a very precise control of the output current.

Conclusion

The STGB10NC60KDT4 component is an insulated gate bipolar transistor (IGBT) designed primarily for use in inverter switching applications. This component has a wide operating temperature range and is available in a variety of package sizes. The component works by regulating the current applied to the gate of the transistor, allowing for a very precise control of the output current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description