TJA1028TK/5V0/20/J

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Transceiver
Protocol:	LINbus
Number of Drivers/Receivers:	1/1
Duplex:	Half
Receiver Hysteresis:	200mV
Data Rate:	--
Voltage - Supply:	4.9 V ~ 5.1 V
Operating Temperature:	-40°C ~ 150°C
Mounting Type:	Surface Mount
Package / Case:	8-VDFN Exposed Pad
Supplier Device Package:	8-HVSON (3x3)
Base Part Number:	TJA1028

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
TJA1028TK/5V0/20/J is a transceiver that is used in a wide variety of applications and interfaces. It is used to provide a reliable method of communication between one or more devices. It is designed to be installed in a wide variety of places, including industrial, automotive, and consumer applications. It is a highly reliable communication interface that can be used to communicate over a wide range of protocols. This article will explain the application field and working principle of the TJA1028TK/5V0/20/J.
Application Field
The TJA1028TK/5V0/20/J transceiver is used in a variety of applications and interfaces. It is commonly used in automotive applications, including engine management systems, ABS systems, transmission systems, traction control systems, and other vehicle systems. It is also used in consumer applications, such as home entertainment systems, digital video systems, and other consumer electronic devices. In industrial applications, it is commonly used in PLCs, CNCs, and SCADA systems. Other uses of the TJA1028TK/5V0/20/J include medical instruments and aerospace systems.
Working Principle
The TJA1028TK/5V0/20/J transceiver works by sending and receiving data over an interface. The transceiver has two parts, a transmitter and a receiver. The transmitter uses a differential driver to send signals to the receiver. The driver is powered by a voltage source such as a 5V power supply. The receiver uses a differential receiver to detect the signals from the transmitter. The receiver is powered by a 3.3V power supply.
The TJA1028TK/5V0/20/J transceiver works by sending differential signals on two lines. The two lines are called the differential pair. The differential pair carries a differential voltage, which is the difference between the two lines. The differential voltage is used to represent a digital signal. The differential voltage is sent from the transmitter to the receiver. The receiver then converts the differential voltage into a digital signal. The digital signal is then processed by the receiving system.
The differential pair lines of the TJA1028TK/5V0/20/J transceiver are designed to reduce noise and interference from other signals. The lines are also designed to reduce energy loss due to radiated energy. The TJA1028TK/5V0/20/J transceiver is also designed to be resistant to electrical stress, temperature variations, and mechanical vibrations.
Conclusion
The TJA1028TK/5V0/20/J transceiver is a highly reliable communication interface used in a variety of applications, including automotive, industrial, and consumer applications. It works by sending and receiving differential signals on two lines. The differential pair lines are designed to reduce noise and interference as well as energy loss due to radiated energy. The TJA1028TK/5V0/20/J is designed to be resistant to electrical stress, temperature variations, and mechanical vibrations.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description