TN0629200000G

Mounting Type:	Through Hole
Screw Thread:	--
Torque - Screw:	--
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	--
Housing Material:	--
Operating Temperature:	--
Color:	White
Features:	--
Wire Termination:	Screwless - Leg Spring, Push-In Spring
Series:	TN
Wire Gauge:	18 AWG
Voltage:	300V
Current:	2A
Mating Orientation:	Horizontal with Board
Pitch:	0.177" (4.50mm)
Positions Per Level:	6
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TN0629200000G, also known as a Wire to Board Terminal Block, is an electromechanical device used in a wide range of applications. Its purpose is to allow electrical signals to be sent from one circuit board to another without requiring physical contact. The TN0629200000G is designed to provide reliable and secure contact between two circuits, and is most commonly used in the automotive, consumer electronics, telecommunications, and aerospace industries.
The TN0629200000G is a two-piece terminal block. It consists of a base unit and a contact block. The base unit is typically made from a polycarbonate material, and is designed to provide a secure and reliable mechanical support for the contact block. The contact block is composed of two insulated copper wires, which are encapsulated within an elastomeric material. The elastomeric material forms an airtight seal between the two insulated wires, providing additional protection against shocks and vibrations.
The TN0629200000G has two main components: a terminal plate, and a connection plate. The terminal plate is used to make electrical connections between the two wires, and is made of a conductive material such as copper. The connection plate is used to provide an additional layer of protection against mechanical and electrical stresses. It is made of either a soft material such as rubber, or a hard material such as polycarbonate.
The TN0629200000G works by allowing two electrical signals to be sent from one circuit board to another without requiring physical contact. The two contact blocks are designed to make a secure and reliable electrical connection when the two wires are pressed together. The connection plate prevents any shocks or vibrations from damaging the connection. In addition, the terminal plate provides an additional layer of insulation to protect the wires from electrical interference.
The TN0629200000G is designed for applications that require a high level of security and reliability. Its use is typically found in automotive, consumer electronics, telecommunications, and aerospace industries. It is often used in applications such as power supplies, DC motors, automotive engine controllers, frequency synthesizers, wireless sensor networks, and digital signal processors. Additionally, the TN0629200000G can be used in applications that require a secure but electrical connection, such as printing presses and automated testing equipment.
In conclusion, the TN0629200000G is an electromechanical device that is used to allow electrical signals to be sent from one circuit board to another without needing physical contact. It consists of two main components: a base unit and a contact block, and works by providing a secure and reliable electrical connection between two wires. The TN0629200000G is often used in the automotive, consumer electronics, telecommunications, and aerospace industries.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description