UCC37324DGNRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Gate Drivers are essential components for the semiconductor industry. UCC37324DGNRG4, a type of Gate Driver from Texas Instruments, is widely used in many different applications, ranging from consumer electronics to automotive systems. This paper will provide an analysis of the applications and working principle of the UCC37324DGNRG4.

The UCC37324DGNRG4 is a high-side and low-side gate driver designed to provide full bridge control of N-channel MOSFETs. It features a low on-state resistance of 0.7 Ohms and its independent power and logic supply ranges in 4.5V to 18V, allowing it to be used in many different types of systems. This gate driver is capable of driving up to 8A with a voltage rating of up to 18V, making it suitable for a wide range of applications.

The UCC37324DGNRG4 is typically used in consumer electronics and automotive systems, such as electric vehicles and battery charging. In consumer electronics, it is used in switch-mode power supplies, motor commutation, and relay control applications. In automotive systems, it is used in H-bridges for motor control, actuator drive systems, and battery charging. In all of these applications, the UCC37324DGNRG4 is able to provide fast switching, low resistance, and low on-state losses, making it an ideal choice for the aforementioned applications.

In terms of the UCC37324DGNRG4’s working principle, it is a full bridge gate driver which allows for bidirectional control to drive an N-channel power MOSFET. The UCC37324DGNRG4 has four mosfets bridged between supply and load through two half bridges. For each half bridge, there is a high-side NMOS and a low-side PMOS that are controlled by two gate driver outputs. The gate drivers provide the necessary voltages to switch the MOSFETs (high-side gate driver to switch the NMOS and low-side gate driver to switch the PMOS) for full bridge control. The UCC37324DGNRG4 employs a built-in 5V voltage regulator for single power supply applications, allowing it to be used with a variety of power sources.

In addition, the UCC37324DGNRG4 features built-in protection features clamping dV/dt noise and minimizing ringing on the supply rails. These features also prevent electromagnetic interference by providing fast turn-on and slower turn-off of the MOSFETs. The built-in charge pump circuit in the UCC37324DGNRG4 delivers a higher VGS voltage to minimize switching losses, further helping to reduce EMI issues.

The UCC37324DGNRG4 also features a variable dead-time control, which allows the user to fine-tune the drive signals depending on their application and requirements. This can be used to reduce switching losses when driving higher voltage loads, and to reduce EMI noise when driving a low-voltage circuit. Additionally, the UCC37324DGNRG4 has a built-in Over Voltage and Under Voltage Lockout function which limits the voltage between the supply and load when the load is below or above the predetermined level. This helps prevent any damage to the load and FETs, providing additional safety and reliability.

In summary, the UCC37324DGNRG4 is a high-side and low-side gate driver designed to provide full bridge control of N-channel MOSFETs. This device is suitable for a wide range of applications, ranging from consumer electronics to automotive systems, and is capable of providing fast switching, low resistance, and low on-state losses. The UCC37324DGNRG4 also includes a variety of built-in protection and compensation features which offer additional safety and reliability when driving higher voltage loads.

The specific data is subject to PDF, and the above content is for reference