UHE2A150MED1TA

Series:	UHE
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	15µF
Tolerance:	±20%
Voltage - Rated:	100V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	5000 Hrs @ 105°C
Operating Temperature:	-40°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	69.3mA @ 120Hz
Ripple Current @ High Frequency:	126mA @ 100kHz
Impedance:	1.2 Ohms
Lead Spacing:	0.098" (2.50mm)
Size / Dimension:	0.248" Dia (6.30mm)
Height - Seated (Max):	0.492" (12.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are widely used in a variety of applications ranging from consumer electronics to high-powered industrial applications. The UHE2A150MED1TA is a special type of aluminum electrolytic capacitors that meets the performance and reliability demands of various power electronics applications. This article will discuss the application field of the UHE2A150MED1TA and its working principle.

Application Field of UHE2A150MED1TA

The UHE2A150MED1TA is a snap-in aluminum electrolytic capacitor that is designed for use in high-power applications, such as solar energy inverters, uninterruptible power supplies (UPS), vertebrates, and server converters. It is also suitable for use in semi-conductor modules as well as in high-current amplifier circuits. The UHE2A150MED1TA is especially designed to have a high ripple current capacity and a leakage current of almost zero at high temperatures.In addition to their uses in power electronics, the UHE2A150MED1TA aluminum electrolytic capacitors are also used in automotive electronics, medical imaging devices, broadcast equipment, and lighting systems. Their capacity is ideal for high-frequency ripple applications.

Working Principle of UHE2A150MED1TA

The construction of an aluminum electrolytic capacitor consists of two metal plates, which act as electrodes, separated by an electrolyte. The metal plates are covered with a thin aluminum oxide film. The electrolyte used in UHE2A150MED1TA is an organic solvent that consists of a mixture of sulfuric acid, boric acid, glycol, and water.To generate a voltage, an electric current is allowed to flow between the two metal plates, which creates an electric field. This electric field causes a build-up of electric current in the electrolyte, resulting in the creation of an electric double layer. This double layer acts as a dielectric, allowing the capacitor to store energy. The thickness of the oxide layer and the size of the electrolyte determine the maximum voltage that can be safely applied to the UHE2A150MED1TA.

Conclusion

The UHE2A150MED1TA is a type of aluminum electrolytic capacitor that can be used in a variety of power electronics applications. It has a high ripple current capacity and a low leakage current at high temperatures. Its construction consists of two metal plates separated by an electrolyte, and an electric double layer is created by the electric current passing between the two plates. This allows the capacitor to store energy safely at a specified voltage. Thus, it is suitable for use in a variety of industries, such as automotive, medical, and broadcast applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description