ZTX560

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ZTX560 is a bipolar junction transistor (BJT) device manufactured by ST Microelectronics. It is a single BJT type transistor with an NPN mode of operation. The ZTX560 is suitable for use in many different types of applications such as for amplifying radio and television signals, as well as for switching circuits.

The ZTX560 has three pins; the base, collector, and emitter. The transistor is wired in an NPN configuration and the base pin is the control pin. When voltage is applied to the base pin, it causes electrons to flow from the emitter to the collector, which produces a current gain. The collector current is the output current and is proportional to the base current and hence the gain of the device.

The ZTX560 can be used in a wide range of applications such as amplifiers, switches, and oscillators. In general, the main applications of the ZTX560 are in the low voltage and low power range, up to a maximum frequency of 3 MHz. It is also used in power amplifiers, voltage amplification, signal switching, low noise amplifiers, and logic gates.

The ZTX560 typically operates in pulsed or oscillating modes. It is mainly used as an amplifier or switch in circuits operating in the range of 0.2 to 3 MHz and can deliver over 100mA of current at saturation. The ZTX560 has a gain of up to 125 across its operating range and can handle up to 50V of voltage.

The working principle of the ZTX560 is that when a small base current is applied, a larger collector current is produced. The transistor acts as an amplifier, with the gain determined by the current ratio of the collector and the base currents. The principle of operation is based on the physics of the semiconductor junctions.

In summary, the ZTX560 is an NPN transistor with a gain of up to 125 and can handle up to 50V of voltage. It has three terminals; base, collector, and emitter and is mainly used in low power and low voltage applications. It mainly operates in the range of 0.2 to 3 MHz and is used in amplifiers, switches, and oscillators.

The specific data is subject to PDF, and the above content is for reference