25LC010AT-E/MS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory is an integral component of all computers and related equipment that stores data or instructions while the device is operating. The 25LC010AT-E/MS is a 1Kb serial EEPROM memory component that is widely used in a variety of applications. This article will discuss the 25LC010AT-E/MS\'s potential applications and the working principle for implementing it.

The 25LC010AT-E/MS is a 1Kbit electrically erasable programmable read only memory (EEPROM) component with a serial interface. It is a low-cost, low-power device that is able to store up to 1024 bytes of data in non-volatile memory. The device is often used in applications that require low density and reliable data storage, such as devices that have limited board space and where batteries are being used as the power source.

The 25LC010AT-E/MS can operate over the extended temperature range of -40°C to +85°C and has an absolute maximum write/erase endurance of 10K cycles. The device has an on-chip inverted write protection that helps to protect against inadvertent write operations. The device also has a self-timed write cycle that allows the device to access the memory without any external control logic. The device has an SPI/QSPI compatible interface, which allows it to be used in a wide range of applications.

The 25LC010AT-E/MS can be used in a variety of applications such as automotive, medical, industrial and consumer electronics. The device is often used in devices that require the storage of configuration parameters and other data that needs to be regularly changed or updated. The device can also be used to store program code and data, such as audio and video streams, that need to be frequently accessed.

The 25LC010AT-E/MS operates from a single 2.7V to 5.5V supply and is controlled through a three-wire serial interface. The interface consists of a serial input (SI), serial output (SO) and a Chip Select (CS) line. The serial interface allows the device to be configured and controlled without the need for any external logic or support hardware. The device has two control instructions: a write instruction and a read instruction. The write instruction writes data to the 25LC010AT-E/MS while the read instruction reads data from the device.

The 25LC010AT-E/MS also contains an 8-bit device address register that is used to identify the device in a multi-master system. The device address register is programmed by the user to provide device identification and allow the component to be shared in a system. The device also has an on-chip power-on-reset circuit that helps protect against data corruption in the event of a power loss.

In summary, the 25LC010AT-E/MS is a low-cost, low-power 1Kbit EEPROM component with a serial interface. The device is suitable for applications that require low density and reliable data storage, such as automotive, medical, industrial and consumer electronics. The device is programmed and controlled through a three-wire serial interface and has an 8-bit device address register that can be used to identify the device in a multi-master system. The device also has an on-chip power-on-reset circuit and can operate over the extended temperature range of -40°C to +85°C with an absolute maximum write/erase endurance of 10K cycles.

The specific data is subject to PDF, and the above content is for reference