25LC040AXT-E/ST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory is an important feature of every electronic device. It stores information so that data can be quickly accessed and processed. One type of memory that can be used for a variety of applications is 25LC040AXT-E/ST. It is a non-volatile memory element that can be programmed with a serial interface. This article will discuss the application field and working principle of the 25LC040AXT-E/ST.

Application Field

The 25LC040AXT-E/ST is a 4Kb SPI serial EEPROM. It is suitable for a variety of applications including portable computing, telecommunications, industrial and automotive. The device is available in several packages including 8-pin PDIP, 8-pin SOIC, 8-pin TSSOP and 8-pin MSOP. These packages make the device suitable for space-constrained applications.

The 25LC040AXT-E/ST has an operating voltage range of 2.7V to 5.5V. This makes it suitable for both low voltage and high voltage applications. Additionally, the device has a high endurance of 100,000 write cycles and a data retention of 20 years. These features make it ideal for applications that require a robust and reliable memory.

Working Principle

The 25LC040AXT-E/ST is a serial EEPROM. It uses a SPI serial interface for communication. This is a simple and low cost interface that provides a half-duplex communication protocol. It uses four signals; Serial Clock (SCK), Serial Data In (SI), Serial Data Out (SO) and Chip Select (CS). A start condition is initiated on the CS pin and then data is shifted in and out with the SCK and SI/SO pins. The device can be programmed and read with the SPI serial interface.

The device can be programmed using either the Byte Write or the Page Write commands. For the Byte Write command, the byte to be programmed is sent to the device and the byte address is incremented automatically. The Page Write command allows multiple bytes to be written to the device in one cycle. This can reduce programming time and is useful for programming large amounts of data.

The device can be read using the Read command. When the Read command is initiated, the device will send out the data requested. The data is sent out most significant bit first. This allows the data to be read quickly and accurately.

Conclusion

The 25LC040AXT-E/ST is a 4Kb SPI serial EEPROM that is suitable for applications ranging from portable computing to automotive. Its low voltage operating range and high endurance make it suitable for robust and reliable applications. Additionally, it has a simple serial interface that allows data to be read and written quickly. These features make the 25LC040AXT-E/ST suitable for a variety of applications.

The specific data is subject to PDF, and the above content is for reference