25LC080BT-E/MS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

25LC080BT-E/MS is a type of non-volatile memory used for data storage. It is an 8K-bit serial EEPROM (extra-correctable) 2-wire bus interface device. It is a small, low-cost memory used in a wide range of applications such as on-board configuration, positioning, logging and many more.

The 25LC080BT-E/MS can be used to store information such as configuration data, strength data, calibration data, log data and other data depending on the application. It is suitable for a range of applications, including automotive, industrial, telecommunications and consumer electronics. The 25LC080BT-E/MS provides excellent performance and reliability, and can be used in applications where low power consumption is required.

The 25LC080BT-E/MS consists of an 8K-bit, non-volatile memory organized as 1,024 woards of 8 bits each. It is deisgned to communicate serially via a two-wire bidrectional bus, allowing for easy connection to a microcontroller. The bus consists of a Clock Input (SCK) and a serial data input/output (SI/SO). The 25LC080BT-E/MS is controllee by three simple commands, allowing it to perform read, write and erase operations. The 25LC080BT-E/MS requires a power supply voltage of 2.7 V to 5.5 V.

The 25LC080BT-E/MS is a popular choice for applications that require a non-volatile memory with an extended temperature range, excellent write/erase performance and nonevolatile storage. It is an ideal solution for embedded systems that require low power consumption and an easy to interface serial bus, such as automotive body and convenience systems.

The working principle of 25LC080BT-E/MS is secured by a 3-byte address code located in the instruction register. This address will determine which portion of the storage area the chip either reads or writes to. The main function of the 25LC080BT-E/MS is to allow for data to be stored permanently until it is modified. When the instruction register is sent, it will set the chip in either write mode or read mode depending on the command given. If a write command is given, the previously programmed data will be overwritten with the new data.

In read mode, the information from the address code will be read, allowing the user to retrieve the stored data. Reading from the chip is done by the master, which is the system controller, and then transferring it to the user. All of the transactions in both write and read mode can be done either in one byte or in multiple bytes.

The 25LC080BT-E/MS is also equipped with an Error Correction Code (ECC) feature, which provides additional data integrity protection. This feature uses a dedicated ECC algorithm to check data integrity during read and write operations, ensuring that any errors resulting from stray radiation or other factors are corrected before they cause data corruption. In addition, the 25LC080BT-E/MS has a factory write-protect feature, which allows the user to lock the chip in a predefined state and protect it from accidental reprogramming.

The 25LC080BT- E/MS is a reliable and cost-effective non-volatile memory solution for a range of applications. Its small size and low power consumption make it ideal for embedded systems, and its excellent write/read performance and extended temperature range make it a good choice for high-reliability systems. In addition, its error correction function further provides for reliable data storage and retrieval in critical applications.

The specific data is subject to PDF, and the above content is for reference