2N5878

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2N5878 bipolar junction transistor (BJT) is a type of general-purpose transistor commonly used for low-power applications. The 2N5878 is a single BJT with a PNP type of construction. Its structure is composed of two sections which are the PNP and NPN junctions.

The 2N5878 has a wide range of applications, including audio amplifiers, optical sensing systems, motor controllers, and logic control circuits. It is also used in analog to digital (A/D) and digital to analog (D/A) converters and as a switch in consumer devices. Furthermore, it can also be used in power switching circuits, integrated low-voltage regulators, and digital linear amplifiers.

The working principle of 2N5878 is based on the fact that when a small voltage is applied to the base of the PNP transistor, the voltage on the junction of the semiconductor P and N material changes. This allows current to flow from the collector to the emitter of the transistor. Thus, it can be used to amplify current or control the output signals. It is also useful for switching on and off signals as it can quickly turn on and off the transistor.

The 2N5878 is designed to operate with a low power supply. When used with a high power supply, it should be protected with a heat sink to prevent the transistor from overheating. It is also important to note that when used in high voltage applications, the voltage rating of the transistor must be considered to ensure that it does not exceed its maximum ratings.

The 2N5878 is a low-power general-purpose transistor ideal for use in low signal and power switching circuits. It has a wide variety of applications ranging from audio amplifiers and motor controllers to logic control and optical sensing systems. Its working principle is based on the fact that a small input voltage can cause a change in the voltage on the junction of the semiconductor P and N material, thus allowing current to flow from the collector to the emitter of the transistor. It is also used as a switch in consumer devices, A/D and D/A converters, and low-voltage regulators. It is designed for operation at low power and should be protected when used with higher-power supplies.

The specific data is subject to PDF, and the above content is for reference