2N6301

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2N6301 transistor is a single, bipolar junction transistor (BJT) designed for general-purpose switching and amplifier applications. The 2N6301 is a silicon device with a maximum collector current of 800 mA, a maximium collector-base voltage of 50V and a maximum collector-emitter voltage of 30V. It has an amplification factor (hFE) of typically 200 when operating from a collector current of 15 mA to a collector current of 40 mA.

The 2N6301 transistor can be used in many applications in electronic circuits. It is well suited for use in low-noise amplifier circuits due to its relatively low noise figure of 7dB. It is also used in power supply circuits, frequency multipliers, logic circuits, and as a linear amplifier. The device can also be used in switching circuits as it can handle large collector currents, making it suitable for motor driver applications. It\'s also used in amplifier circuits that require high gain.

The working principle of the 2N6301 is based around the interactions between a constant current source and a PNP transistor (the 2N6301 is a PNP type). The current source supplies a constant current I to the PNP transistor, hence the constant current source is also called an ampere meter. When a base-emitter voltage is applied to the transistor, the collector current I1 is proportional to the base-emitter voltage, as given by the following equation:

I1 = (Beta * I)/(V BE - V BR )

Where Beta denotes the current gain of the transistor, I denotes the collector current and V BE and V BR denotes the base-emitter and base-collector voltages respectively. When a signal voltage signal is applied to the base-emitter, the collector current will increase or decrease proportionally, resulting in a gain dependent on the Beta value.

When using 2N6301 transistor in a circuit, be sure to limit the current flowing through the base. Too much current flowing through the base can damage the transistor and create instability in the circuit. If the current is too low the transistor may not perform adequately. Connect the base resistor so that the collector current is limited to a safe level. Additionally, use appropriate heat sinking when using the device in high power applications as the device can dissipate a significant amount of power. Always use caution when working with transistors as they can be damaged easily from improper handling.

Overall, the 2N6301 transistor is a cost-effective and versatile device for a wide range of applications, from low-noise amplifiers to motor drivers. It has a wide operating range with a maximum collector current of 800mA and a high current gain of 200. The device should be operated with the appropriate safety measures in place for maximum safety. It should also be used in appropriate applications to ensure the best performance. The 2N6301 transistor is an ideal choice for many electronic beginning and advanced applications.

The specific data is subject to PDF, and the above content is for reference