2N6395G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs

A thyristor is a three terminal, solid-state semiconductor device having four layers of alternating N and P-type materials. It is a type of a semiconductor switch found widely in modern electronics, with a wide range of applications ranging from power control to AC motors. One of the types of thyristors is SCR (silicon controlled rectifier). An SCR is a four-layer diode with a control electrode (gate) connected to the middle of the PN junction. SCRs are mainly used as switches in AC circuits and their function is to either switch load circuit or current flow “on” or “off”.

The 2N6395G is an SCR that is used to control power applications such as light dimmers and AC circuits. It is a bidirectional SCR that is specifically designed for high power applications up to 600 volts. This SCR is designed with a fast turn-on and reverse blocking capability to ensure reliable operation. It has a low on-state voltage drop and maximum on-state current load up to 2.5 amps.

The way the 2N6395G works is quite simple. Electric current flowing through the anode and cathode pins allows the current to flow, turning the device “on”. When the gate terminal is then connected to the cathode terminal, the current is then blocked and effectively turning the SCR “off”. The SCR can be used to construct a bridge rectifier circuit, to regulate the intensity of light of an incandescent lamp, or as an electronic switch to control power in AC circuits. The SCR is designed to be used with low-power AC circuits, as it can allow the current to flow in one direction, but not in the opposite direction. With its excellent reverse blocking capability, this SCR is often used in circuits where AC current is necessary for its efficient operation.

The 2N6395G SCR also comes with several features to ensure reliable and safe operation. It has short-circuit protection, which prevents overheating of the component by limiting the output current. It also has thermal protection that shuts down the circuit when the junction temperature reaches a critical level. Additionally, the SCR also comes with a built-in noise filter, which limits high-frequency noise caused by power conversion.

In summary, the 2N6395G is an SCR that is used in power applications where AC current is necessary. It can be used to construct a bridge rectifier circuit, to control the intensity of light in an incandescent lamp, or as an electronic switch. It has excellent reverse blocking capability and features like thermal protection and noise filter that ensures reliable operation and safety.

The specific data is subject to PDF, and the above content is for reference