2SC39400RA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2SC39400RA is a medium power NPN transistor that is used for a variety of applications. It is a single transistor device and falls under the category of bipolar transistors. It is a general purpose device and is capable of operation at frequencies up to 500MHz.

The 2SC39400RA is a through hole device that comes in an SOT-323 package. It consists of a single transistor die with a collector, base and emitter terminal. The device has a maximum collector-emitter voltage of 60V and a maximum collector current of 400mA. The device also has a maximum power rating of 200mW.

The 2SC39400RA is used in a wide variety of applications. It can be used in power amplifiers, low noise amplifiers, motor control and switching regulators. It is also used in signal conditioning, audio preamplifiers, attenuators and RF amplifier stages. The device is used in automotive applications as well.

The 2SC39400RA transistor works on the principle of amplification of an input signal. When the base voltage is increased, it causes current to flow in the collector-emitter circuit. This current at the output is larger than the input current at the base. Thus, the transistor amplifies the signal.

The working of the 2SC39400RA can be further understood by looking at its internal construction. It consists of three doped layers of silicon that are arranged in a specific pattern. The middle layer is the base and the layers on either side are the collector and the emitter. When the base voltage is increased, it causes current to flow through the collector-emitter circuit. This current, which is larger than the input current, is the amplified signal.

The 2SC39400RA is a general purpose device that can be used in a wide range of applications. It is capable of operation at frequencies up to 500MHz and has a maximum collector-emitter voltage of 60V and a maximum collector current of 400mA. The device also has a maximum power rating of 200mW.

The working principle of the 2SC39400RA is based on the amplification of an input signal. The transistor works by increasing the base voltage, which in turn causes current to flow through the collector-emitter circuit. This current, which is larger than the input current, is the amplified signal.

The specific data is subject to PDF, and the above content is for reference