2SCR554RTL

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Transistor Type:	NPN
Current - Collector (Ic) (Max):	1.5A
Voltage - Collector Emitter Breakdown (Max):	80V
Vce Saturation (Max) @ Ib, Ic:	300mV @ 25mA, 500mA
Current - Collector Cutoff (Max):	1µA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce:	120 @ 100mA, 3V
Power - Max:	1W
Frequency - Transition:	300MHz
Operating Temperature:	150°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	SC-96
Supplier Device Package:	TSMT3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
The 2SCR554RTL is a common single bipolar transistor (BJT) device and has been widely used in electronics applications. It is a type of NPN transistor and is composed of three layers of semiconductor material, called a base, collector, and emitter. It has two PN junctions, one connecting the base and collector, and the other connecting the collector and emitter. This allows current to flow between collector and emitter, but not from the base to the emitter.Application Field
One of the main applications for the 2SCR554RTL is in the design of power amplifiers. Because of its low power use and ability to switch between states quickly, the 2SCR554RTL is often used as an amplifier for audio and other signal signals. It can help to boost the amplitude of an input signal to drive a speaker or other device. It can also be used to control the gain of a signal using an external control input. Additionally, the 2SCR554RTL can be used in voltage regulator designs, where it is used to control the voltage output of a power supply.The 2SCR554RTL is also used in digital logic circuits, such as logic gates. In these applications, the transistor acts as a switch, allowing the current to flow through the base-collector junction when the base is supplied with a voltage higher than the emitter voltage. This allows the transistor to act as an "on-off switch," allowing the gate circuit to be set to either an active or inactive state.The 2SCR554RTL is one of the most common transistor designs used in many designs of power amplifiers, audio amplifiers and other circuits. The device is also used to supply motor control and drive circuitry, in order to provide precise speed or power control of electric machines. The 2SCR554RTL can be used to create a closed loop control system, where the transistor is used to sense the current output of the machine and adjust the input voltage or current as needed to keep the output in a desired state.Working Principle
The working principle of the 2SCR554RTL lies in its ability to control the flow of electric current between its collector and emitter. When a voltage is applied to its base, it allows current to flow through the base-collector junction, reducing the resistance between the two pins and allowing the current to flow. The amount of current that flows is regulated by the voltage applied to the base, allowing the transistor to act as an amplifier, control circuit, or switch.The 2SCR554RTL typically uses a small amount of power to operate, as it only requires a small voltage to be applied to its base. This allows the device to be powered by a battery or other low power sources and energy saving is achieved. The device is also temperature-tolerant, meaning that it can continue to work without suffering any damage even when subjected to extreme temperatures.Conclusion
The 2SCR554RTL is a single bipolar transistor (BJT) device, commonly used in power amplifiers and other electronic circuits. Due to its low power consumption and fast switching between states, the 2SCR554RTL is often used for audio amplification and controlling the gain of a signal. Additionally, the transistor is used in digital logic gates, and motor control, where it is used to sense the current output and adjust the input voltage as needed to keep the output in a desired state. Finally, the 2SCR554RTL has the ability to work in extreme temperatures, which allows it to be used in a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description