CPC3909CTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CPC3909CTR is an enhancement-mode n-channel power MOSFET with a high-voltage TrenchFET structure. It is classed as an automotive-grade device, rated at 100 volts and 40 amps. It has a parasitic bipolar transistor built in, and the low-sleep-state resistance leads to reduced power consumption. It is suitable for use in applications such as high-side switching, low-side switching, and gate drive in general.

This MOSFET is designed for use in automotive non-isolated DC/DC converters, and as such it has a fully isolated package. It is constructed using the TrenchFET process in a custom-shaped TO-220AB exposed pad package. The device has a dielectric strength of 1800 V between each terminal and the exposed pad.

The CPC3909CTR has a breakdown voltage of 100 V and the characteristic threshold voltage is only 2 V. It has an excellent current transfer ratio of 0.2 A/V and a fast switching speed of 4 nsec. The maximum on-state resistance is only 7 mΩ and the gate-source threshold voltage is -1 V, so the device has very low power loss.

In terms of its operating principle, the CPC3909CTR works by regulating the current flow between two electrodes, within a single layer of material. When the voltage applied across the two electrodes is greater than the threshold (breakdown) voltage, the current is enabled and turns on the device. The current then flows from the source to the drain electrodes, and the voltage applied on the gate controls the amount of current that can flow through the device.

This power MOSFET is used in a wide range of applications, such as automotive, consumer, industrial, telecommunications, and computers. In automotive systems, the device can be used for high-side switching and gate drive in DC/DC converters. In consumer electronics, it can be used for low-side switching circuits, voltage regulation, and pulse-width modulation. In industrial systems, it can be used for motor control, magnetics, and solenoid control. In telecommunications, it can be used for switching power supplies, base station power converters, and line card control. And, in computers, it can be used for intelligent power supply protection and processor voltage regulators.

Overall, the CPC3909CTR is an excellent choice for high-power switching applications, due to its low on-state resistance, fast switching speed, and wide voltage range. It is easy to use and has a wide range of application in different industries. With its automotive-grade rating, the device can be used without sacrificing reliability in the long run.

The specific data is subject to PDF, and the above content is for reference