EDB4064B4PB-1DIT-F-R TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory is a vital part of any system; without it, a computer would have no way to access and store data. The EDB4064B4PB-1DIT-F-R TR is a type of memory integrated circuit. It is a double-data-rate 3 (DDR3) synchronous dynamic random access memory (SDRAM) chip with four ranks, each with 256Meg × 72 bits. The chip’s built-in multiplexers, registers, and sense amplifiers allow it to operate at two different frequencies, 1066MHz and 1600MHz.

Application Field

The EDB4064B4PB-1DIT-F-R TR is used in servers, desktop PCs, and laptops, as well as other embedded products. It is designed to maximize data rate and minimize latency. It is ideal for desktops and workstations that require multiple simultaneous accesses to memory. The chip is also used in embedded designs for a wide range of applications, including medical and aerospace.

Working Principle

The chip is a type of synchronous dynamic random access memory (SDRAM). This means that its operation is synchronized by the clock speed of the system in which it is installed. To read from or write to the memory, commands are sent along the bus from the system’s processor. These commands are decoded by the EDB4064B4PB-1DIT-F-R TR, which then performs the necessary operation. The chip then reads or writes the data and sends it back to the processor.

The EDB4064B4PB-1DIT-F-R TR uses a double data rate architecture, meaning that the data is transferred twice per clock cycle instead of the traditional single data rate architecture. This allows the chip to reach higher data speeds and improve system performance. It also uses advanced error correction code (ECC) to detect and correct any errors that may occur during a read or write operation.

The EDB4064B4PB-1DIT-F-R TR uses an integrated circuit (IC) to interface with the memory cells. The IC is connected to the system’s processor by a data line. This line carries the commands and data to and from the memory cell. The chip also uses multiplexers, registers, and sense amplifiers to ensure the correct data is read from and written to the memory cells.

Conclusion

The EDB4064B4PB-1DIT-F-R TR is a type of double data rate 3 (DDR3) synchronous dynamic random access memory (SDRAM) chip with four ranks, each with 256Meg × 72 bits. It is used primarily in servers, desktops, laptops, and embedded products. The chip is synchronized by the clock speed of the system in which it is installed and uses advanced error correction code to detect and correct errors. It also uses an integrated circuit, multiplexers, registers, and sense amplifiers to interact with the memory cells, ensuring accurate data transfer.

The specific data is subject to PDF, and the above content is for reference