ESH2CHE3_A/H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An ESH2CHE3_A/H is a single diode-rectifier device. It’s a semiconductor device that is used as a ‘one-way’ valve, to control the direction of current flow in electronic circuits. In its most basic form, a single diode-rectifier is a two terminal device which is constructed from a piece of doped semiconductor material. A single diode-rectifier has two regions of semiconductor material – the Anode (A) and the Cathode (C). When the two regions are connected to each other, electricity will only flow in one direction, from Anode to Cathode, hence the name rectifier. There is a junction between the two regions, which determines the flow of electricity. A single diode-rectifier is normally used in a circuit as a full-wave or half-wave rectifier, to convert an alternating current (AC) into a direct current (DC). This is a useful application of the device, as it enables a circuit to be powered from a mains electricity supply. In its simplest form, a half-wave rectifier is only made up of a single diode-rectifier. The diode is connected in series with the mains electricity supply and the load. When the voltage across the diode is positive, the diode is forward-biased and current can flow. When the supply voltage is negative, the diode is reverse-biased and current cannot flow. In addition to its application as a rectifier, a single diode-rectifier is also used as an AC switch. When the voltage across the diode is below a certain level, the diode will turn off, thus blocking the flow of current. This can be used to control the timing of switches in a circuit, or for protection of the circuit against any sudden voltage spikes. A single diode-rectifier can also be used as a voltage regulator. By adjusting the forward bias current of the diode, the voltage across the diode can be controlled. The physical construction of a single diode-rectifier is relatively simple, and they are relatively cheap to produce. They can also be manufactured in various voltage ratings, and are available in both through-hole and surface-mount packages. In summary, a single diode-rectifier is a two terminal device which is constructed from a piece of doped semiconductor material. It is used as a one-way valve to control the direction of current flow in electronic circuits, and it is commonly used as a full-wave or half-wave rectifier, an AC switch, or a voltage regulator. It is available in various voltage ratings, and is relatively inexpensive and easy to use.

The specific data is subject to PDF, and the above content is for reference