GP10BE-E3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single GP10BE-E3/54 application field and working principle

A single diode is an electronic component used to be an ideal rectifier for AC current. A single diode such as GP10BE-E3/54 allows current to flow in only one direction – from anode to cathode. In other words, the diode acts like a one-way valve or switch, “Letting” current flow in one direction only, whereas “Blocking” current from the other direction.The GP10BE-E3/54 is usually used as a rectifier in power supplies, voltage multipliers, and signal clamping applications. It allows the conversion of AC voltage to DC voltage. It can provide extremely high speed switching and very low reverse leakage with low forward voltage drop. The GP10BE-E3/54 is also suitable for high-temperature applications.

Working Principle

A single diode such as the GP10BE-E3/54 converts AC voltage to DC voltage by allowing the forward current to pass through the diode when forward bias is applied (i.e. when the anode voltage is higher than the cathode voltage). This forward bias current is conducted by the diode’s intrinsic properties.

Besides, when reverse bias is applied (i.e. when the anode voltage is lower than the cathode voltage), the reverse current is blocked by the diode’s reverse bias breakdown voltage, allowing only a very small reverse current through.

The forward voltage drop for a diode is the voltage drop between its anode and cathode terminals when in forward bias, and is a major parameter in determining the forward current conducted by the diode. The GP10BE-E3/54 forward voltage drop is typically 0.7V.

Advantages of the GP10BE-E3/54

The GP10BE-E3/54 offers the following advantages:

• High speed switching - with a typical switching speed of 1NS
• Low reverse leakage - with a typical reverse leakage of 0.1μA
• Low forward voltage drop - with a typical forward voltage drop of 0.7V
• High temperature operation - with an operating temperature of up to 150 °C

Conclusion

The GP10BE-E3/54 is an ideal rectifier for AC current. It is mainly used as a rectifier in power supplies, voltage multipliers, and signal clamping applications. It offers very fast switching speed, low reverse leakage, and low forward voltage drop, making it suitable for high-temperature applications.

The specific data is subject to PDF, and the above content is for reference