GP10G-4004HE3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GP10G-4004HE3/54 is a single rectifier diode commonly used in electrical circuit applications. Rectifier diodes like GP10G-4004HE3/54 can be used both as a rectifier of AC power or a switch of DC power. It can be used to regulate voltage in power supplies, protect against over-voltage, and create pulses in digital systems.

GP10G-4004HE3/54 is a fast-switch type diode with a maximum forward voltage drop of about 0.4 V and a maximum reverse leakage current of about 5 µA at a reverse voltage of 10 V. It is capable of switching high currents of up to 10 A or higher depending on the application.

The GP10G-4004HE3/54 is used in a wide range of applications, such as voltage regulation, power supply design, power conversion, signal switching, and RF switching. It is also used in automotive, computer, telecommunication, and consumer electronics designs. The GP10G-4004HE3/54 can be used as a bridge rectifier in a full-wave bridge rectifier circuit or in a half-wave bridge rectifier circuit.

Understanding the basic working principle of GP10G-4004HE3/54 is important in order to successfully use the device in an application. A signal is first applied to the anode of the diode, which creates an instantaneous forward bias. This allows current to flow through the diode. When the signal starts to decrease, the forward bias vanishes and the diode is then in a reverse bias condition. This causes the stored charge to be dispersed by the anode, and the diode will block any further current from flowing from the cathode to the anode.

In power supply designs, the GP10G-4004HE3/54 is used as a rectifier diode to convert alternating current (AC) to direct current (DC) by allowing current to flow freely in one direction and blocking current from flowing in the opposite direction. GP10G-4004HE3/54 can also be used as a switch to turn an electrical circuit on and off. When a positive voltage is applied to the anode of the diode, it will be forward bias, allowing the current to flow from the anode to the cathode. When the voltage is removed, the diode is in a reverse bias condition, blocking current from flowing from the cathode to the anode.

In digital systems, the GP10G-4004HE3/54 can be used as a clock pulse generator. By applying alternating current to the diode, it will be forward bias and regular pulses will be created. The pulses can then be used to drive digital logic. The frequency of the pulses can be changed by adjusting the parameters of the AC power applied to the diode.

The GP10G-4004HE3/54 can also be used as a voltage regulator in linear power supplies. It limits the output voltage to a predetermined level by dissipating the excess voltage. This is accomplished by applying the output voltage to the anode of the diode, so that when the voltage reaches the predetermined value, the diode will limit the current flow, thereby preventing the output voltage from rising further.

The GP10G-4004HE3/54 is also used in RF circuits to protect sensitive components from high voltage surges or over-voltages. The diode prevents current from flowing in one direction, thus protecting the RF components from damage due to over-voltage.

In conclusion, GP10G-4004HE3/54 is a versatile single rectifier diode used in a wide range of applications. It is used as a bridge rectifier in power supplies, to create pulses in digital systems, and to regulate voltage in linear power supplies. It also protects sensitive components from over-voltage and helps create digital logic. Therefore, it is an important component in many electronic designs.

The specific data is subject to PDF, and the above content is for reference