KSC2310RBU

Series:	--
Packaging:	Bulk
Part Status:	Obsolete
Transistor Type:	NPN
Current - Collector (Ic) (Max):	50mA
Voltage - Collector Emitter Breakdown (Max):	150V
Vce Saturation (Max) @ Ib, Ic:	500mV @ 1mA, 10mA
Current - Collector Cutoff (Max):	100nA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce:	40 @ 10mA, 5V
Power - Max:	800mW
Frequency - Transition:	100MHz
Operating Temperature:	150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-226-3, TO-92-3 Long Body
Supplier Device Package:	TO-92-3
Base Part Number:	KSC2310

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to KSC2310RBU

KSC2310RBU is a type of single bipolar junction transistor (BJT). It is constructed using a single layer substrate and its construction is simple, making it relatively easy to repair compared to other BJTs. The KSC2310RBU has a maximum collector current rating of 800mA, a maximum voltage rating of 40V, and a maximum power dissipation of 800mW. It is also able to handle pulse width modulation (PWM) switching with a maximum frequency of 300KHz and an input capacitance of 215pF.KSC2310RBU is a commonly used BJT in amplifier circuits. It is widely used in consumer electronics, telecommunications, and other consumer electronics applications. It has excellent heat resistance and can be used at temperatures up to 150°C.

KSC2310RBU Application Field

KSC2310RBU is used in all kinds of small signal amplifiers, such as audio amplifiers and radio frequency amplifiers. The small signal amplifiers are used as a preamp for any audio source, including microphones, guitars, and keyboards. The amplified audio from the KSC2310RBU can then be sent to a power amplifier.KSC2310RBU can also be used to create DC-to-DC converters. They are used in different systems, such as automotive electrical systems, portable power supplies, and audio systems. This type of amplifier is used to convert a low voltage DC signal into an output with a significantly higher voltage.

KSC2310RBU Working Principle

The KSC2310RBU consists of a single transistor, which is the main active component of the amplifier. As it operates, the transistor will act as an amplifier. It amplifies a small electrical signal to a much larger signal.The bipolar junction works like a valve. It either let’s current pass through or blocks it depending on the direction of the input/output signal. When an input signal is applied, it causes the junction to turn on. This in turn causes current to flow through the transistor, which eventually results in an amplified signal.The KSC2310RBU has an emitter-base voltage of 300mV and a collector-emitter voltage of 0.6V. It is able to operate up to a maximum frequency of 300KHz and can be used with a wide range of input/output signal levels.

Conclusion

KSC2310RBU is a single bipolar junction transistor that is used in amplifiers and other applications. The transistor amplifies a small input signal to a much larger signal. The KSC2310RBU can be used with a wide range of input/output signal levels and can operate up to a maximum frequency of 300KHz. It is a commonly used BJT in amplifier circuits and is widely used in consumer electronics, telecommunications, and other consumer electronics applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description