L6563S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - PFC (Power Factor Correction):

Power Factor Correction (PFC), or power factor correction, is the process of adjusting an electrical load to increase its power factor. This is done by utilizing active or passive components, such as capacitors or inductors, to ensure that a load’s power input is as close as possible to its ideal power factor of 1. The closer the power factor is to 1, the less wasted energy and the more efficient an electrical system is.

The L6563S PFC driver is a highly efficient, low-power PFC solution for any application. The device can be used in a variety of applications, such as switched mode power supplies, DC-DC converters, and LED lighting systems. The L6563S device has two integrated gate drivers capable of driving external N-channel and P-channel MOSFETs with a total power limitation of almost 400 watts. It features a wide range of features, such as EMC immunity, short-circuit protection, and over temperature protection thanks to its on-chip temperature sensor. The device is particularly adapted for applications with a step-down converter, providing an efficient and reliable power solution.

The L6563S works by first converting an AC input into a DC input at a given operating frequency by using a full-bridge rectifier. This is then filtered to remove any high-frequency components, leaving behind a DC input ready for regulation. The DC output of the rectifier is then fed into the power factor correction circuit. The L6563S is equipped with two internal devices, a buck-boost controller, and a P-channel MOSFET. The P-channel MOSFET, configured as a switch, is used to store the excess current temporarily while the buck-boost controller senses the current and controls the switch to ensure that the current is delivered to the load in a controlled manner.

Once the power factor correction circuit has controlled the current to a desired level, it is then sent to the output stage, which is a synchronous buck-boost converter. This converter works by using the inductor and switching mosfet to regulate the amount of current in the output. The output stage also uses the inductor to store excess power for later use when the load’s current requirements fall below the minimum. Finally, the output stage sends the current to the load where it is used to power the load’s components. This is done in such a way that the current is tightly regulated to reduce power losses.

In conclusion, the L6563S PFC driver is a highly efficient and reliable PFC solution that is ideal for a variety of applications. Its integrated gate drivers, EMC immunity, short-circuit protection, and temperature protection make it particularly suited for applications requiring an efficient and reliable power solution. Moreover, the L6563S uses a two-stage approach to accurately regulate the current to the load, drastically reducing power losses and increasing system efficiency.

The specific data is subject to PDF, and the above content is for reference